Actual product may differ from pictured

This kit fits vehicles with the following RPO codes: FT2 - FT3 - FT4 - FT5 - FT6 - FT7

The new Adventure Series kit for the 01-10 HDs includes a pair of heavy duty upper a-arms, a full differential drop system that relocates the differential down 2" for near stock angles at the 3" lift height. This is accomplished with a drop spacer on the passenger''s side, (2) drop brackets for the front driver''s mount and a integrated "half crossmember" for the driver''s rear mount. A new different skid plate is included to protect the differential in its new position. The rear is lifted via a 2" block and u-bolts.

Quick Specs:

  • Front Lift Height: 3"
  • Front Lift Method: Upper Control Arms
  • Rear Lift Height: 2"
  • Rear Lift Method: Block
  • Install Time Hrs: 3-4
  • Difficulty Level 1-5: 3
  • Wheel Size: 17"
  • Back Spacing: 5"
  • Max Tire Size: 33 x 12.50

Front and rear Hydro shocks are included.

Important Notes!

  • Frame bracket mount modification required
  • Torsion bar unloading/loading tool required
  • Will not fit dually models

To determine whether a C31 or C32 kit is required, verify which RPO codes are shown on the "Service Parts Identification" sticker in the glove box to determine the factory installed torsion keys:
Any of the following RPO codes require the C31 kit: FT2 - FT3 - FT4 - FT5 - FT6 - FT7
Any of the following RPO codes require the C32 kit: FK2 - FK3 - FF6 - FF7 - FF8 - FF9

Other products by Zone Offroad Products
Part No: ZON C31
Our Price: $795.95
Qty:
 

Description 


Fits:

  • 01-10 Chevy / GMC 3500 Pickup Silverado / Sierra 4WD
  • 01-10 Chevy / GMC 2500HD Ton Pickup Silverado / Sierra 4WD

This new addition to the Adventure Series lineup of lift systems is built around the Zone Offroad heavy-duty replacement upper control arms already available for the 01-10 HD trucks. The arms are made from 3/16" steel that is precision laser cut, formed and fully welded. Preinstalled Raybestos brand ball joints and rubber bushings provide an easy installation and long service life. The ball joint is repositioned to compensate for the added lift and maintain a neutral position at ride height. To complement the improved upper ball joint angles, the kit address the other area often ignored at this lift height - the CV shafts.

The new Adventure Series kit for the 01-10 HDs includes a full differential drop system that relocates the differential down 2" for near stock angles at the 3" lift height. This is accomplished with a drop spacer on the passenger''s side, (2) drop brackets for the front driver''s mount and a integrated "half crossmember" for the driver''s rear mount. A new different skid plate is included to protect the differential in its new position. The rear is lifted via a 2" block and u-bolts.

Front and rear Hydro shocks are included.

Important Notes!

  • Frame bracket mount modification required
  • Torsion bar unloading/loading tool required
  • Will not fit dually models

To determine whether a C31 or C32 kit is required, verify which RPO codes are shown on the "Service Parts Identification" sticker in the glove box to determine the factory installed torsion keys:
Any of the following RPO codes require the C31 kit: FT2 - FT3 - FT4 - FT5 - FT6 - FT7
Any of the following RPO codes require the C32 kit: FK2 - FK3 - FF6 - FF7 - FF8 - FF9

1
2