Displaying 1 - 24 of 29 results
07-17 CHEVY, GMC 1500 SKID PLATE - ZONE OFFROAD PRODUCTS
ZON C5651
Price: $59.95

This Zone skid plate provides both additional protection and gives a great off-road look. This skid plate fits 07-17 GM 1500 vehicles equipped with Zone suspension kits. Red backing plate shown is NOT included.


DANA 44 DIFFERENTIAL GUARDS - ROUGH COUNTRY SUSPENSION
HEC 1033
Price: $59.95

These RCX differential guards are made from 1/4" thick steel and are designed to help protect your differential from fluid loss and damaged gears. Differential Guards are a necessity for protecting the vital parts in your front and rear end.

Does NOT fit 07-15 Jeep JK Wrangler front Dana 44 axles - use HEC 1045.

DANA 30 DIFFERENTIAL GUARDS - ROUGH COUNTRY SUSPENSION
HEC 1035
Price: $69.95

These RCX differential guards are made from 1/4" thick steel and are designed to help protect your differential from fluid loss and damaged gears. Differential Guards are a necessity for protecting the vital parts in your front and rear end.

DANA 35 DIFFERENTIAL GUARDS - ROUGH COUNTRY SUSPENSION
HEC 1036
Price: $59.95

These RCX differential guards are made from 1/4" thick steel and are designed to help protect your differential from fluid loss and damaged gears. Differential Guards are a necessity for protecting the vital parts in your front and rear end.

DANA 44 JEEP JK FRONT DIFFERENTIAL GUARD - ROUGH COUNTRY SUSPENSION
HEC 1045
Price: $59.95

These RCX differential guards are made from 1/4" thick steel and are designed to help protect your differential from fluid loss and damaged gears. Differential Guards are a necessity for protecting the vital parts in your front and rear end.

Fits 07-15 Jeep JK Wrangler front Dana 44 axles.

DANA 30 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA30
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant

DANA 35 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA35
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


DANA 44 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA44
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


DANA 60 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA60
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


CHRYSLER 8.25 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA825
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


FORD 8.8 DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SA88
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


CHEVY, GMC 10 BOLT DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SAC10
Price: $80.00

Features

  • Fits GM REAR 10 bolt only!
  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


CHEVY, GMC 14 BOLT DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SAC14
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


FORD STERLING DIFFERENTIAL COVER - SOLID AXLE INDUSTRIES
SA SASTLG
Price: $80.00

Features

  • Lifetime warranty
  • Thick nodular iron casting with reinforcing ribs.
  • Fully machined seal surface.
  • Machined bolt bosses for maximum clamping force.
Benefits
  • Adds rigidity to weak factory housings
  • Replaces weak factory stamped steel covers
  • Large diameter fill plug for easy fluid replacement
  • Higher fill plug location for increased fluid capacity
  • Dense material quiets down noisy lockers.
Includes:
  • Heavy duty powder coated cover.
  • Zinc plated hardware (10 pieces)
  • Fill plug
  • Silicone sealant


BOMBSHELL DIFF COVER - DANA 30 - BARE - POISON SPYDER
PS 42-11-030
Price: $98.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 30 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 30 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuringsimply fill the diff to the level of the fill hole.

The Bombshell differential cover is cast from highly ductile nodular ironthe same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyderour powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 30 - BLACK PC - POISON SPYDER
PS 42-11-030-PC
Price: $108.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 30 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 30 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyder our powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 44 - BARE - POISON SPYDER
PS 42-11-044
Price: $98.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 44 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 44 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Dana 44 Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. Click the icon at left to view our Install Instructions, and view the video on the right to see the installation process. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyder our powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 44 - BLACK PC - POISON SPYDER
PS 42-11-044-PC
Price: $108.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 44 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 44 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Dana 44 Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyderour powder coat option is just a single color (all black).

G2 GM 14 9.5 DIFF COVER BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2010MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

G2 FORD 9.75 DIFF COVER BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2012MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

G2 GM 8.5/8.6 DIFF COVER BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2021MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

G2 GM 14 10.5 DIFF COVER BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2023MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

G2 AAM 11.5 DIFF COVER BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2024MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

G2 CHRY 9.25 DIF CVER FRONT BALL-MILLED BLACK FINISH - G2 AXLE & GEAR
G2 40-2026MB
Price: $269.99

G2’s aluminum differential covers are engineered to protect your ring and pinion by cooling the gear oil, as well as providing additional protection from impact. Made from heat-treated aluminum, these covers have internal and external cooling fins that help dissipate the heat from your oil. They also incorporate a magnetic dip stick and drain plug (featuring a very powerful rare earth magnet) that draws any metal particles to helps filter the oil. The Brute differential cover comes coated with a premium UV stable powder coat for a superior finish. They include all necessary stainless steel hardware.

1 2