These heavy duty upper control arms provide additional strength as well as extra caster for lifted applications. These arms can be combined with leveling kits and suspension kits up to 6" to help restore alignment issues as well as taking stress off of OEM ball joints. The Uniball ball joints allow additional articulation of suspension travel.

These upper control arms are built using the same materials and contruction techniques used by off-road racers. 4130 Chromoly Tubing, greasable bushings, Teflon lined American made Uniball bearings and 4340 heattreated Uniball pins with misalignment bushings are just some of the features on these arms.

 

 
 
Displaying 1 - 17 of 17 results
06-17 DODGE 1500 HEAVY DUTY UPPER CONTROL ARMS        ZONE OFFROAD PRODUCTS
ZON D2301
Price: $430.95

Upgrade your late model lifted or leveled Ram 1500 with this set of heavy duty upper control arms.

The issue with most leveling kits for the newer Rams results from the stock upper ball joints being maxed out prior to the suspension fully drooping out when lifted more than 1" above stock. The ball joints are not designed for the extra strain when the suspension is bound up leading to premature ball joint failure.

These new heavy duty UCAs are engineered to correct this issue by repositioning the ball joint to allow a full range of motion when used with most leveling kit and suspension lifts.

These arms dwarf the factory units and are built from 1/8" steel, boxed and fully welded with CNC-machined bushing and ball joint cups.
The arms feature a durable textured black finish and come fully assembled right out of the box with OE durometer rubber bushings for quiet, reliable function.
OE-style heavy duty greasable ball joints are utilized for a long service free operation and superior corrosion resistance to uniball style control arms.

These UCAs will work with the Zone Offroad 6" suspension system for the 06-17 Ram 1500 models.

Featured Technology & Benefits:

  • Fully welded, heavy duty upper control arms that dwarf the factory arms.
  • CNC-machined bushing and ball joint cups for precise fitment
  • OE rubber bushings and greasable factory style ball joints for quiet, reliable, and low maintenance operation.
  • Heavy Duty ball joint acheives maximum control arm range of motion
  • Ball joint positioning adjusted compared to stock arms to keep it in a neutral position with 2-3" of lift.
  • Replacable ball joints - replacements are readily available from most auto parts stores when needed many miles down the road.
  • Fixes ball joint binding issue commonly known to occur on these models with spacer-only type leveling kits that use the factory UCAs
  • Fully assembled right out of the box
  • Will work with Zone Offroad 6" suspension systems.
  • Detailed, easy to follow installation instructions included
  • Powdercoated finish.
  • Limited Lifetime Warranty.
11-18 GM 2500HD, 3500 W/ 4" LIFT UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS21126
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 11-18 GM 2500HDs and 3500s with a Fabtech 4 inch kit only.
These arms provide an additional +2.5 degrees of caster.

  • These Fabtech Uniball Upper Control Arms are designed for use with stock or lifted vehicles. 
  • These heavy duty control arms replace the stock upper control arms and are designed for severe use. 
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

Search By Size

11-18 GM 2500HD, 3500 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS21127
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 11-18 GM 2500s and 3500s with 0 and 6 inches of lift.

These arms provide an additional +2.5 degrees of caster.

  • These Fabtech Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

07-14 GM 1500 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS21128
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 07-14GM 1500s with 0-6 inches of lift. These arms will only fit 2013-2014 trucks with factory STEEL suspension.

These arms provide an additional +2 degrees of caster.

  • These Fabtech Uniball Upper Control Arms are designed for use with stock or lifted vehicles.
  • These heavy duty control arms replace the stock upper control arms and are designed for severe use.
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 434 Uniball pin is super strong and can be installed with no modifications to the spindle.

01-10 GM 2500, 3500 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS21132
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 01-10 GM 2500s and 3500s with 0 and 6 inches of lift.

These arms provide an additional +2 degrees of caster.

  • Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

09-13 FORD F150 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS22159
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 09-13 Ford F150s with 0-6 inches of lift.
These arms provide an additional +2.5 degrees of caster.

Fabtech Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.
These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

09-17 DODGE 1500 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS23039
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 09-17 Dodge 1500 trucks with 0 and 6 inches of lift.

Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use. These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points. A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks. A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

04-13 NISSAN TITAN UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS25009
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 04-13 Nissan Titans with 0 and 6 inches of lift.

Fabtech's Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.

These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points. A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

07-17 TOYOTA TUNDRA UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS26041
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 07-17 Toyota Tundras with 0 and 6 inches of lift.

Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.

These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points. A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks. A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

10-13 TOYOTA FJ CRUISER UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS26044
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 10-13 Toyota FJ Cruisers with 0 and 6 inches of lift.

Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper
control arms and are designed for severe use. 
These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for
increased wheel travel when used with Dirt Logic Coilover shocks.
A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

06-09 TOYOTA FJ CRUISER UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS26045
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 06-09 Toyota FJ Cruisers with 0 and 6 inches of lift.

Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper
control arms and are designed for severe use. 
These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for
increased wheel travel when used with Dirt Logic Coilover shocks.
A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

05-14 TOYOTA TACOMA UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS
FT FTS26046
Price: $606.48

These Fabtech Uniball Upper Control Arms fit 05-14 Toyota Tacomas with 0 and 6 inches of lift.

Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper
control arms and are designed for severe use. 
These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for
increased wheel travel when used with Dirt Logic Coilover shocks.
A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

07-18 GM FRT UPPER CONTROL ARMS
HEC 1278
Price: $259.95

Fits:07-18 Chevy/GMC 1500 Pick-Up

  • 07-18 Chevy/GMC Tahoe/Yukon
  • 07-18 Chevy/GMC Suburban/ Yukon XL
  • These upper control arms feature Clevite OEM style rubber bushings and pressed in ball-joints by MOOG, the most trusted name in Ball Joint design, for easy installation. They allow for full downtravel and increased clearance to the upper strut mount.

    The upgraded Ball Joints by MOOG are easy to install and easier to maintain than any other joint on the market. The Moog Ball Joint system utilizes two powdered-metal "gusher" bearings with grease grooves to provide the most durable wear surface available. A sealed boot design with grease-relief valve keeps contaminants out while providing a sealed, serviceable environment.

    • Control arms include MOOG Problem Solver pressed-in ball joints to ease installation.
    • Control arms include Clevite brand OEM style rubber bushings
    • ONLY fits models with 3.5 - 7.5-inches of suspension lift.
    • Install Time: 3-4 hours
    10-13 DODGE RAM 2500/3500 4X4 SHORT CONTROL ARMS 0-2" - TOP GUN CUSTOMZ
    TGC 22440140
    Price: $309.95


    We here at TGC have been listening to our customers! We have made some improvements to our Dodge Ram short arms. Our short arms are still as beefy as the old style, but witha higher PV value, ptmeg bushing and DOM sleeve assembly, they just got a lot better. We also installed new screw in zerk fittings, with the upper arms now having a 90 and 45 degree head on them for easier accessibility when installed on the truck.

    Kit Contains:

    • (2) Fixed-Length Upper Control Arms
    • (2) Fixed-Length Lower Control Arms
    • (16) witha high PV value, ptmeg bushings (4 per arm)
    • (8) DOM Sleeves (2 per arm)
    • (8)Screw in style Zerk Fittings with 90 and 45 degree head on upper arm for easier accessibility when installed on the truck (2 per arm)
    • All Necessary Hardware Detailed Instructions
    • Bushings, sleeves, and zerk fittings come pre-installed just add grease before installation!

    This is a complete set containing (2) tubular upper control arms, (2) tubular lower control arms, and all necessary sleeves, bushings, and zerk fittings. All arms are powdercoated black, have all bushings/sleeves/zerk fittings installed, and include new Top Gun Customz decals. All Top Gun Customz control arms are manufactured as a matched set to provide you with the proper pinion angle and front-to-rear axle alignment.

    Kit Features:

    • Completely bolt-on using factory hardware (and supplied hardware)
    • Fully-welded DOM ends
    • Bushings and sleeves come pre-pressed in the arms
    • Pre-installed zerk fittings allow greasing of the bushings
    10-13 DODGE RAM 2500/3500 4X4 SHORT CONTROL ARMS 3"-4" - TOP GUN CUSTOMZ
    TGC 2244024
    Price: $309.95


    We here at TGC have been listening to our customers! We have made some improvements to our Dodge Ram short arms. Our short arms are still as beefy as the old style, but witha higher PV value, ptmeg bushing and DOM sleeve assembly, they just got a lot better. We also installed new screw in zerk fittings, with the upper arms now having a 90 and 45 degree head on them for easier accessibility when installed on the truck.

    Kit Contains:

    • (2) Fixed-Length Upper Control Arms
    • (2) Fixed-Length Lower Control Arms
    • (16) witha high PV value, ptmeg bushings (4 per arm)
    • (8) DOM Sleeves (2 per arm)
    • (8)Screw in style Zerk Fittings with 90 and 45 degree head on upper arm for easier accessibility when installed on the truck (2 per arm)
    • All Necessary Hardware Detailed Instructions
    • Bushings, sleeves, and zerk fittings come pre-installed just add grease before installation!

    This is a complete set containing (2) tubular upper control arms, (2) tubular lower control arms, and all necessary sleeves, bushings, and zerk fittings. All arms are powdercoated black, have all bushings/sleeves/zerk fittings installed, and include new Top Gun Customz decals. All Top Gun Customz control arms are manufactured as a matched set to provide you with the proper pinion angle and front-to-rear axle alignment.

    Kit Features:

    • Completely bolt-on using factory hardware (and supplied hardware)
    • Fully-welded DOM ends
    • Bushings and sleeves come pre-pressed in the arms
    • Pre-installed zerk fittings allow greasing of the bushings
    00-02 DODGE 2500/3500/ 00-01 DODGE 1500 CONTROL ARMS 2"-3" - TOP GUN CUSTOMZ
    TGC 2844014
    Price: $309.95



    We here at TGC have been listening to our customers! We have made some improvements to our Dodge Ram short arms. Our short arms are still as beefy as the old style, but witha higher PV value, ptmeg bushing and DOM sleeve assembly, they just got a lot better. We also installed new screw in zerk fittings, with the upper arms now having a 90 and 45 degree head on them for easier accessibility when installed on the truck.

    Kit Contains:

    • (2) Fixed-Length Upper Control Arms
    • (2) Fixed-Length Lower Control Arms
    • (16) witha high PV value, ptmeg bushings (4 per arm)
    • (8) DOM Sleeves (2 per arm)
    • (8)Screw in style Zerk Fittings with 90 and 45 degree head on upper arm for easier accessibility when installed on the truck (2 per arm)
    • All Necessary Hardware Detailed Instructions
    • Bushings, sleeves, and zerk fittings come pre-installed just add grease before installation!

    This is a complete set containing (2) tubular upper control arms, (2) tubular lower control arms, and all necessary sleeves, bushings, and zerk fittings. All arms are powdercoated black, have all bushings/sleeves/zerk fittings installed, and include new Top Gun Customz decals. All Top Gun Customz control arms are manufactured as a matched set to provide you with the proper pinion angle and front-to-rear axle alignment.

    Kit Features:

    • Completely bolt-on using factory hardware (and supplied hardware)
    • Fully-welded DOM ends
    • Bushings and sleeves come pre-pressed in the arms
    • Pre-installed zerk fittings allow greasing of the bushings
    07-18 GM FRT UPPER CONTROL ARMS
    HEC 1278ALUM
    Price: $259.95

    Fits:07-18 Chevy/GMC 1500 Pick-Up

  • 07-18 Chevy/GMC Tahoe/Yukon
  • 07-18 Chevy/GMC Suburban/ Yukon XL
  • These upper control arms feature Clevite OEM style rubber bushings and pressed in POM ball-joints for easy installation. They allow for full downtravel and increased clearance to the upper strut mount.

    The upgraded ball joints are easy to install and maintenance free.These POM ball joints offer a greater range of motion for more wheel articulation than standard or OE replacements. These ball joints feature a Polyoxymethylene ball race with an extremely low coefficient of friction for longer life, and a larger ball diameter to improve range of motion with a maintenance free design.

    • Control arms include POM ball joints for greater range of motion and easier installation
    • Control arms include Clevite brand OEM style rubber bushings
    • ONLY fits models with 3.5 - 7.5-inches of suspension lift.
    • Install Time: 3-4 hours