Displaying 1 - 15 of 15 results
07-11 JEEP JK 2 DOOR REAR DRIVESHAFT - FABTECH MOTORSPORTS
FT FTS94051
Price: $717.92

07-08 JEEP JK REAR DRIVESHAFT
Fits both 2 Door vehicles
These driveshafts are a Heavy-Duty replacement for the OEM shafts


07-11 JEEP JK 4 DOOR REAR DRIVESHAFT - FABTECH MOTORSPORTS
FT FTS94052
Price: $717.92

07-08 JEEP JK REAR DRIVESHAFT
Fits both 4 Door vehicles
These driveshafts are a Heavy-Duty replacement for the OEM shafts


07-12 JEEP JK FRONT DRIVESHAFT - FABTECH MOTORSPORTS
FT FTS94057
Price: $717.92

07-12 JEEP JK FRONT DRIVESHAFT
Fits both 2 & 4 Door vehicles
These driveshafts are a Heavy-Duty replacement for the OEM shafts


SLIP YOKE ELIMINATOR NP 231 TRANSFER CASE - ROUGH COUNTRY SUSPENSION
HEC 50-7906
Price: $214.95

Jeep model NP231 transfer cases have one glaring weak point. They use a slip yoke on the rear output shaft of the transfer case instead of having a fixed yoke and a driveshaft with slip splines. This design works fine on the street but once you have lifted your Jeep and installed bigger tires on it, the stress on the slip yoke or rear output shaft is often too much. This kit includes everything to modify your transfer case, this kit does require Rough Country's extended travel driveshaft, which helps to prevent driveline vibration and the rear output shaft from breaking.

This kit works on all Jeeps with the NP231 transfer case. Designed with the most current design shaft found in the New Process Gear NP231. This current design shaft was introduced in 1997. Jeep vehicles using the early NP231 can still use this kit, providing that the needle bearings are removed from the stock drive sprockets.

00-06 TJ REAR DRIVE SHAFT DANA 44 W/ 5 SPEED - ROUGH COUNTRY SUSPENSION
HEC 5074.1
Price: $299.95

This rear driveshaft fits 00-06 Jeep TJs with Dana 44 rear ends and 5 speed transmissions.

This Rough Country constant velocity driveshaft reduce vibrations on your lifted Jeep TJ when your Jeep is lifted 4" or more. These high quality driveshafts fit into the stock yokes.

97-06 JEEP TJ REAR DRIVESHAFT W/ DANA 35 REAR END - ROUGH COUNTRY SUSPENSION
HEC 5075.1
Price: $299.95

This double cardan style CV driveshaft is recommended for Jeep TJ Wrangler models equipped with 4" - 6" suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

Notes:

  • A Slip Yoke Eliminator is REQUIRED.
  • Does NOT fit Rubicon models.
  • Recommended on models with 4" - 6" of lift.
84-01 JEEP CHEROKEE XJ DRIVESHAFT - ROUGH COUNTRY SUSPENSION
HEC 5076.1
Price: $299.95

Kit Contents:

Rear: Extended CV driveshaft, Flanges/Yokes, Hardware.

Notes:

  • A Slip Yoke Eliminator is REQUIRED.
  • Recommended on models with 4" - 6" of lift.

Benefits:

  • After lifting your Jeep XJ Cherokee a CV (Double Cardan) driveshaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.
  • Includes better quality CV joints.
  • Shaft strength is twice as strong as the factory equipped driveshaft.
  • Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the botom of your Jeep.
94-95 JEEP YJ DRIVE SHAFT - ROUGH COUNTY SUSPENSION
HEC 5077
Price: $299.95

This double cardan style CV drive shaft is recommended for 94-95 Jeep YJ Wrangler models equipped with 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking. A Slip Yoke Eliminator is REQUIRED (HEC 50-7906).

Benefits:

  • After lifting your Jeep YJ Wrangler a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.
  • Includes better quality CV joints.
  • Shaft strength is twice as strong as the factory equipped drive shaft.
  • Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep.
87-02 JEEP TJ/YJ REAR CV STYLE DRIVESHAFT - ROUGH COUNTRY SUSPENSION
HEC 5080.1
Price: $299.95

These constant velocity driveshafts reduce vibrations on your lifted Jeep.

This Rough Country Rear CV style driveshaft fits:

  • 97-02 Jeep TJs equipped with a 4 cylinder / 3 speed Automatic Transmission
  • 87-93 Jeep YJ models with 4" of lift.
03-06 JEEP TJ WRANGLER RUBICON REAR CV DRIVESHAFT - ROUGH COUNTRY SUSPENSION
HEC 5088.1
Price: $389.95

This double cardan style CV REAR driveshaft is recommended for Jeep TJ Rubicon models equipped with 4" - 6" suspension lifts to prevent driveline vibration and the rear output shaft from breaking. This driveshaft will flex to a nominal 30 degrees prior to binding and is a direct bolt in replacement that does not require removing the factory original out-put mass vibration dampener hub. It is built on a 3" tube diameter and uses the stock 1330 sized universal joint at the rear differential end.

07-11 JEEP JK 2 DOOR REAR CV DRIVESHAFT - ROUGH COUNTRY SUSPENSION
HEC 5097.1
Price: $399.95

This driveshaft fits the rear of 07-11 2 Door Jeep JKs.

This REAR double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5" - 6" short arm suspension lifts or 2.5" - 6" long arm suspension lifts.

It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel.

They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop. This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

07-11 JEEP JK 4-DOOR REAR CV DRIVESHAFT - ROUGH COUNTRY SUSPENSION
HEC 5099.1
Price: $399.95

This double cardan style CV driveshaft is necessary for Jeep JK models equipped with 3.5" - 6" short arm suspension lifts or 2.5" - 6" long arm suspension lifts.

It features a replacement flange for the differential pinions as opposed to using an adapter flange. These flanges are machined from solid billet steel. They are designed to accept standard "off the shelf" mating flanges. If these flanges ever break, you at least stand a chance of getting a replacement part from almost any drive line shop.

This also nets a longer drive shaft with the center of the universal joint closer to the pinion bearing.

JEEP TAIL SHAFT CONVERSION - PROCOMP SUSPENSION
PC 4007
Price: $329.99

These Pro Comp NP231 short shaft or slip yoke eliminator kits shorten the T-case, allowing you to run a 4 in. longer CV-style driveshaft. Combined with a CV-style driveshaft (sold separately), they help eliminate driveline vibration and the friction of the factory slip yoke design. These kits also improve driveline angles and eliminate the need for a transfer case lowering kit. This helps improve ground clearance, since the skid pan is not lowered. The new main shaft is close to 20 percent larger than factory, and will take the added torque of 4-to-1 conversions, additional horsepower, and larger tires.

87-93 JEEP YJ REAR DRIVESHAFT/5 SPEED W/1310 U-JOINTS - SKYJACKER SUSPENSION
SK YJRSE
Price: $472.18

This rear driveshaft fits a Jeep YJ with a 5 speed transmission using 1310 U-joints.