Displaying 1 - 24 of 34 results
LED WORK LIGHT WIRING HARNESS - ENGO WINCHES
ENG EN-JG-10WW
Price: $14.95

Wiring harness for use with Engo RW-Series and SW-Series LED work lights. One harness will wire 2 lights.

8" ROUND CHROME LIGHT - PROCOMP SUSPENSION
PC 9130
Price: $46.99

PC 9130 8" 130 Watt
Driving Light Round
W/Cover Chrome
Sold as a Single light


8" ROUND BLACK LIGHT - PROCOMP SUSPENSION
PC 9131
Price: $41.99

PC 9131 8" 130 Watt
Driving Light Round
W/Cover Black
Sold as a Single light


6" ROUND STAINLESS LIGHT - PROCOMP SUSPENSION
PC 9160
Price: $41.99

PC 9160 6" 130 Watt
Driving Light Round
Stainless Steel
Cover Included
Sold as a Single light


SWITCH KIT - PROCOMP SUSPENSION
PC 9300
Price: $18.99

PC 9300 Hd Switch
Install Kit For 2 Lights

5" ROUND 55 WT CHROME SPOT LIGHT - PROCOMP SUSPENSION
PC 9550
Price: $23.99

PC 9550 5" 55 Watt
Chrome Spot Light Round
W/Cover
Sold as a Single light


BLACK SPOT LIGHT - PROCOMP SUSPENSION
PC 9551
Price: $19.99

PC 9551 5" 55 Watt
Fluted Light Round
W/Cover Black
Sold as a Single light


55 WATT STAINLESS STEEL SPOTLIGHT - PROCOMP SUSPENSION
PC 9556
Price: $32.56

PC 9556 5" 55 Watt
Spot Light Round
W/Cover Stainless
Sold as a Single light


55 WATT BLACK FLUTED LIGHT - PROCOMP SUSPENSION
PC 9561
Price: $19.99

PC 9561 5" 55 Watt
Fluted Light Round
W/Cover Black
Sold as a Single light


55 WATT STAINLESS STEEL FLUTED LIGHT - PROCOMP SUSPENSION
PC 9566
Price: $32.56

PC 9566 5" 55 Watt
Fluted Light Round
W/Cover Stainless
Sold as a Single light


7" DRIVING LAMP - PROCOMP SUSPENSION
PC 9851
Price: $70.99

PC 9851 7" 100 Watt
Motorsports Driving Light
No Cover Plastic
Sold as a Single light


9" DRIVING LIGHT ROUND - PROCOMP SUSPENSION
PC 9911
Price: $92.99

PC 9911 9" 55 Watt
H11 Bulb
Motorsports Driving Light
No Cover Plastic
Sold as a Single light

LED ROCK LIGHT KIT W/ MOUNTING BRACKETS- ROUGH COUNTRY SUSPENSION
HEC 70541
Price: $69.95

COMMAND THE DARK with Rough Country''s 4-piece LED Rock Light Kit! These waterproof, 2,000 lumens Rock Lights can be mounted to the inside of your truck or Jeep''s wheel wells to light up the ground below for better approach angles and jaw-dropping good looks.

Rough Country''s Rock Lights feature quick plug and play connectors for easy installation, and the low-profile design makes them a perfect choice for adding additional lighting to wheel wells, truck beds, boats, ATV''s and anywhere else you can imagine! Each kit includes a set of four angled mounts for easy installation and optimum light projection from underneath the vehicle.

These Rock Lights feature a top-of-the-line IP68 Waterproof / Dustproof rating and aluminum protective housing, making them fully submersible and ready to withstand the elements. The flood light design offers a broad spread of light for optimum illumination to spot hazards on the trail in the dead of night. Includes Rough Country’s 3-Year Limited Warranty.

FEATURES

  • Includes 4 rock light
  • Includes 18-feet of wire to accommodate most vehicles
  • Broad flood beam design
  • Light up the ground below for better approach angles
  • Easy install plug and play connectors

SPECS

  • Install Time: 1-2 hours

TRUCKLITE 7" ROUND LED HEADLAMP - POISON SPYDER
PS 41-02-270
Price: $299.99

Improve your Jeep's headlamp performance with these 7" Round LED Headlamps with complex reflector optics! These advanced LED headlamps from Trucklite are the state of the art in LED lighting, providing crisp, bright LED light with low amp draw. These headlamp assemblies can replace most 7" round OE headlamps, including those in Jeep JK, TJ and CJ! SOLD BY EACH (select quantity of 2 of you need a pair).

  • When properly mounted, exceeds FMVSS-108 and CMVSS-108 DOT requirements for low beam and high beam performance
  • Excellent option for light, medium and heavy-duty trucks, off-road vehicles, classic cars, motorcycles and more.
  • Metalized reflector optics provide a lighting experience that smooth and clean across the driving surface
  • Provides a brighter, crisper and whiter light output, closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility
  • Durability and dependability of LED lighting provides a solid-state, bulb-free headlamp design that impervious to damage from shock and vibration
  • Military grade, die-cast aluminum housing and non-yellowing, polycarbonate lens offer optimum protection against damage from impact, roadside debris and other hazards
  • Electronics are sealed in epoxy to resist from damage caused by corrosion or moisture
  • Advanced circuitry protects against voltage spikes up to 600v
  • Drop-in replacement for #6014, 6015, 6016, H6024 and Par 56 headlamp designs
  • Uses standard, H4, 3-blade wiring connector
  • Equipped with Truck-Lite 3-Year Limited Warranty.
  • Poison Spyder includes Trucklite's H4 to H13 Adapter Harness 96630 (required for use in Jeep JK and other vehicles with an H13 headlamp socket)

Material:

  • Hard-coated polycarbonate lens
  • eCoat aluminum housing and internal structures
  • Metalized Reflector
  • 16 Gauge Wire

Light Source:

  • 2 LED Arrays
  • 9v-33v Multi-volt design works with both 12v and 24v systems

Designed At:

  • 12.8v, 1.80a (low beam), 3.60 amps (high beam)
  • 25.6v, 1.00a (low beam), 1.80 amps (high beam)
  • 1,300 Lumens

Additional Specifications:

  • Operating temperature range: -40?C to 50?C
  • Overvoltage protection to 600v, w/constant output
  • Mechanical aim

3/4" LED MARKER LAMP - 2-WIRE - CLEAR/AMBER - POISON SPYDER
PS 41-02-285
Price: $28.99

LED marker lamp or turn signal for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a TWO WIRE assembly, meaning it can be used as either a turn signal OR a marker lamp, but NOT as both. These high quality LED lamps are DOT-approved for use on your vehicle. Beware of cheaply made LED's that do not carry the DOT approval. Choose your lens color from: amber, red or clear (clear lens includes amber diode, so it shines amber when lit up). Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair).

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. In most cases it will require wiring alterations.

4" 6-LED TAILLIGHT FLANGE STYLE - POISON SPYDER
PS 41-04-036
Price: $35.99

6-diode flush mount LED taillight with red lens for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer's corner protectors, or anywhere you can cut a 4-1/2" hole in a flat sheetmetal panel. Flange-mounting style, red lens. Sold by each, if you need a pair specify a quantity of 2.

4" 24-LED TAILLIGHT PUSH-IN WITH PIGTAIL AND GROMMET - RED - POISON SPYDER
PS 41-04-050
Price: $30.99

These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4" round light (requires a 4-1/2" hole) with red lens. Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the "options") units with clear lenses use red diodes, so they still flash red when lit up. These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer's corner protectors or anywhere you can cut a 4-1/2" round hole in a flat panel. Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).

4" 24-LED TAILLIGHT PUSH-IN W/ PIGTAIL AND GROMMET-CLEAR/RED - POISON SPYDER
PS 41-04-051
Price: $30.99

These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4" round light (requires a 4-1/2" hole) with red lens. Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the "options") units with clear lenses use red diodes, so they still flash red when lit up. These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer's corner protectors or anywhere you can cut a 4-1/2" round hole in a flat panel. Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).

3/4" LED MARKER LAMP - 3-WIRE - RED - POISON SPYDER
PS 41-04-070
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

3/4" LED MARKER LAMP - 3-WIRE - CLEAR/AMBER - POISON SPYDER
PS 41-04-080
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

3/4" LED MARKER LAMP - 3-WIRE - AMBER - POISON SPYDER
PS 41-04-085
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

RECTANGULAR LED MARKER LAMP - AMBER - POISON SPYDER
PS 41-04-203
Price: $30.99

This rectangular LED Marker Lamp is the solution for those who need to run a combination marker lamp and turn signal in the same unit. This may be necessary on Jeeps where the OE turn signals and/or marker lamps were removed in order to install aftermarket armored fenders such as Poison Spyder DeFenders. Unlike our 3/4" Round LED Marker Lamp, these are a 3-wire lamp which can perform two separate functions (minor and major or typically, marker lamp and turn signal).

For those needing a combination marker lamp/turn signal to satisfy local legal requirements, the small rectangular shape makes this lamp the ideal size to mount along the outer edge of the Poison Spyder DeFender. Installation requires simply drilling a 3/8" hole, thoroughly cleaning the mounting surface, peeling back the adhesive cover, pusing the wires through the hole then firmly pressing to set the adhesive, then making the wiring connections.

Note that this is a surface-mount lamp. If mounting on the outer edge of the Poison Spyder DeFenders, it may serve to satisfy local DMV/DOT requirements, however it will be mounted in a vulnerable spot if your Jeep is wheeled hard in tight situations. DeFenders are designed as trail armor, and are intended to be rubbed along the rocks, trees, etc., which would of course damage this lamp if mounted along the outer surface. The lamp may be mounted in more protected areas by either drilling a hole or fabricating a simple mounting bracket, at the installer's discretion.

Features & Benefits

  • Lamps operate in minor and major output levels; major function activated by the brake function or turn signal
  • Major function is 3 times brighter than minor function (amber)
  • Red Major function is 7 times brighter than minor function
  • Provides marker/clearance solution that requires no mounting brackets or installation screws
  • Lamps adhere directly to application surface through use of heavy-duty adhesive backing
  • P2-Rated
  • Electronics are completely sealed in epoxy to resist damage caused by moisture and corrosion
  • Easy-to-install peel-off liner
  • Rear exit wire version requires a 3/8" mounting hole, and self-seals hole upon installation

Construction

  • Polycarbonate Lens
  • Over-Molded Housing
  • Encapsulated Circuitry
  • 20 Gauge Wire

Light Source

  • 3 Light Emitting Diodes (LED)
  • Designed at 13.5v
  • (Minor)0.004A - 0.015A
  • (Major)0.048A - 0.068A

LED LICENSE PLATE AND 3RD BRAKE LIGHT  - POISON SPYDER
PS 41-04-406
Price: $49.99

This kit makes it easy to mount a combination license plate and 3rd brake light to your license plate. LED's provide bright light with low power draw. Mounts to the two upper license plate bolts. Electrical connectors are included, however extra wire may be required depending on your mounting location. This part number includes a 6-foot wiring harness extension with weatherpak connector, for relocating the license plate to the spare tire carrier or other locations that are far from the OE location.

JK LED TAIL AND REVERSE LIGHTS AND WIRING HARNESS KIT - POISON SPYDER
PS 41-08-010
Price: $199.99

This complete kit includes everything you need to install 4" round high intensity LED taillights and 2-1/2" round LED reverse lights into the Poison Spyder Crusher Corners on your Jeep JK Wrangler. AT A HUGE SAVINGS over purchasing these items separately! Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.

This kit includes:

  • (1) JK LED Taillight Harness - Passenger Side (p/n 41-06-010-P)
  • (1) JK LED Taillight Harness - Driver Side (p/n 41-06-010-D)
  • (1) 4in LED Back-Up Light Extension Harness (Pair) (p/n 41-06-030)
  • (2) 4� 24-LED Taillight Push-In with Pigtail & Grommet - Red (p/n 41-04-050)
  • (2) 2-1/2� LED Back-Up Light - Clear (p/n 41-04-300)

Exclusive "Plug-N-Play" Design Poison Spyder's wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep's customized rear lighting setup. The JK LED Taillight Harness - Driver Side is typically used on the driver's side and does not include provisions for the license plate light. The LED Taillight Harness - Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light - PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for most configurations. Each of these Taillight Harnesses plug right into your Jeep's factory wiring harness�simply unplug the stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.

Supports 4" Round LED Taillights both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4" Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle's computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors. NOTE: The LED taillight connector is designed to work with the 4" round LED Taillights sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of taillight.

Supports 2-1/2" Round LED Back-Up Lamps both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2" Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4" Back-Up Light Extension Harness on each side. To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24" Back-Up Light Extension Harness (NOTE: Not included in this kit, must be purchased separately) on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accomodate both a 4" and a 24" Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle's back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you'll have to research and make the necessary alterations to the harness and the vehicle's wiring on your own. NOTE: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2" Round LED Back-Up Lamps sold by Poison Spyder only. They are not guaranteed to fit any other brand or model of lamp.

Supports LED License Plate & Third Brake Light (NOTE: Not included in this kit, must be purchased separately) The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate & 3rd Brake Light - PSC Connectors. On most Jeep JK's on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the stock position on the driver's side corner. In most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body's corner cavity, secured with some zip-ties. NOTE: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light - PSC Connectors sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of license plate light or third brake light.

1 2