Displaying 25 - 35 of 35 results
CJ BFH FRONT BUMPER - TRAIL STINGER - POISON SPYDER
PS 11-16-020-S
Price: $375.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The BFH Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ TRAIL STINGER - POISON SPYDER
PS 13-11-010
Price: $209.99

Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for today's extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable.

Poison Spyder Front Stingers come in two types: Trail and Competition. This part number is for the Trail Stinger. The Trail Stinger is built on a base plate laser cut from 3/16" plate steel, with a Stinger hoop made of CNC-bent 1-3/4" X .120 wall DOM structural tubing. The Trail Stinger's main hoop stands 27" from its base at a 47° angle. Poison Spyder Stingers are designed to bolt directly onto your Jeep's frame using OE mounting hardware. Comp Stingers may be reinforced with horizontal support tubes as shown in the "action" photos above, however these are not included in the kit. Stingers are shipped bare steel.

Poison Spyder Stingers do NOT include winch mounting provisions, but they will work with any manufacture's winch mount plate, as will OE or most aftermarket tow hooks. If a stronger recovery point is desired check out Poison Spyder's D-Ring Shackle Tabs or perhaps opt for our BFH Bumper with Trail or Comp Stinger. Relocation of any bumper-mounted auxiliary lights is required, but we offer a variety of Fairlead Light Mounts to relocate auxiliary lights to the top of your roller or hawse winch fairlead.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ COMP STINGER - POISON SPYDER
PS 13-12-010
Price: $229.99

Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for today's extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable.

Poison Spyder Front Stingers come in two types: Trail and Competition. This part number is for the "Comp" Stinger. The Comp Stinger is built on a base plate laser cut from 3/16" plate steel, with a Stinger hoop made of CNC-bent 1-3/4" X .120 wall DOM structural tubing. The Comp Stinger's main hoop stands 36" from its base at a 45° angle. Poison Spyder Stingers are designed to bolt directly onto your Jeep's frame using OE mounting hardware. Comp Stingers may be reinforced with horizontal support tubes as shown in the "action" photos above, however these are not included in the kit. Stingers are shipped bare steel.

Poison Spyder Stingers do NOT include winch mounting provisions, but they will work with any manufacture's winch mount plate, as will OE or most aftermarket tow hooks. If a stronger recovery point is desired check out Poison Spyder's D-Ring Shackle Tabs or perhaps opt for our BFH Bumper with Trail or Comp Stinger. Relocation of any bumper-mounted auxiliary lights is required, but we offer a variety of Fairlead Light Mounts to relocate auxiliary lights to the top of your roller or hawse winch fairlead.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - POISON SPYDER
PS 13-16-020
Price: $269.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - BRAWLER BAR - POISON SPYDER
PS 13-16-020-B
Price: $375.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - COMP STINGER - POISON SPYDER
PS 13-16-020-C
Price: $395.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - TABS - POISON SPYDER
PS 13-16-020-D
Price: $319.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - BRAWLER BAR - TABS - POISON SPYDER
PS 13-16-020-DB
Price: $425.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - COMP STINGER - TABS - POISON SPYDER
PS 13-16-020-DC
Price: $447.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Comp Stinger for the BFH front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - TRAIL STINGER - TABS - POISON SPYDER
PS 13-16-020-DS
Price: $425.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The BFH Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

YJ BFH FRONT BUMPER - TRAIL STINGER - POISON SPYDER
PS 13-16-020-S
Price: $375.99

Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The BFH Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

1 2