Poison Spyder stuff is built for the hardcore Jeep enthusiast. Poison Spyder builds high end bumpers, armor and accessories that was developed from years of rock-crawling and buggy building.
We carry the complete line of Poison Spyder products. If you do not see what you are looking for, call us at 1-800-847-3287.   
 
 
Displaying 1 - 24 of 47 results
3/4" LED MARKER LAMP - 3-WIRE - AMBER - POISON SPYDER
PS 41-04-085
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

2-1/2" LED BACK-UP LIGHT - CLEAR - POISON SPYDER
PS 41-04-300
Price: $29.99

The 2-1/2" flush mount LED back-up light for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer''s corner protectors, or anywhere you can cut a 2-3/4" hole in a flat sheetmetal panel. push-in mounting with the included rubber grommet. Sold by each, if you need a pair specify a quantity of 2.

HAWSE FAIRLEAD RIGID 10" LED LIGHT BAR MOUNT - POISON SPYDER
PS 45-28-R10
Price: $35.99

Poison Spyder Hawse Fairlead Rigid 10" LED Light Bar Mounts provide winch-equipped vehicles with a convenient location to mount a Rigid Industries 10" E-Series or 10" SR-Series LED light bar.. Alternatively, it may be used to mount a pair of Rigid Industries Dually or Dually D2 LED lights, or similar small package LED lights from other manufacturers. (Each of these Rigid Industries products are avilable directly through Poison Spyder Customs). When used to mount a pair of individual lights, note that this mount locates the lights closer to the front of the winch compared to our standard Hawse Fairlead Light Mount. These Fairlead Light Mounts can be installed behind most Hawse-type winch fairleads. This may be beneficial for Jeeps equipped with aftermarket bumpers such as Poison Spyder''s Trail Stinger, which may displace auxiliary lights which were previously bumper-mounted.

The Mount is CNC laser-cut from 3/16" plate steel and powder-coated a semi-gloss black finish for long-lasting great looks and corrosion resistance. Installation is extremely easy, requiring only simple hand tools. Complete installation instructions are included.

ALUMINUM HAWSE WINCH FAIRLEAD - POISON SPYDER
PS 45-45-010
Price: $55.99

The Poison Spyder Aluminum Hawse Fairlead will help protect your synthetic winchline during winch operation, as well as give the front of your 4X4 a little bit of Poison Spyder attitude. CNC machined from billet aluminum and powdercoated for a durable finish.

WINCH FAIRLEAD MOUNT - POISON SPYDER
PS 45-57-010
Price: $55.99

The Poison Spyder Winch Fairlead Mount installs between the winch and the bumper to provide a mounting surface for the winch fairlead. The Winch Fairlead Mount is designed to fit the 10 x 4-1/2 bolt pattern common to most Warn winches except 8274. Many other winch brands use the same bolt pattern. The Winch Fairlead Mount is designed to fit the winch rope slot and 10 bolt pattern of most Warn or common aftermarket roller or Hawse fairleads, including the Poison Spyder Aluminum Hawse Winch Fairlead (P/N 45-45-010).

ZEON WINCH SPACER PLATES - POISON SPYDER
PS 45-57-010-03
Price: $10.99

Use these Spacer Plates when mounting a Warn Zeon Winch on to your Poison Spyder Brawler Lite, Brawler MID**, or JK RockBrawler front bumper. On these bumpers, the slight recess along the top surface of the bumper is just slightly incompatible with the extra wide, low housing ends on the Zeon winches. Simply lifting the winch about an extra 1/8" solves this problem. These spacers are a convenient way to do that, by simply placing them between the winch and the fairlead mount to provide the lift needed. CNC laser cut from 3/16" plate steel, powder coated black.

**IMPORTANT: Brawler MID Front Bumpers will require TWO pairs of spacer plates to install the Warn Zeon winch.

3/4" RECOVERY SHACKLE UNIVERSAL - POISON SPYDER
PS 56-16-010
Price: $15.99

These heavy duty 3/4" Recovery Shackles are rated at a working load limit of 4-3/4 tons.

Made of high quality steel and yellow zinc plated for corrosion resistance. The heavy duty D-ring and massive 7/8" threaded pin make a quick job of safely rigging recovery straps and winch cables.

No 4X4 should be on the trail without a couple of these in the onboard recovery kit.

Sold by the piece.

3X30 RECOVERY STRAP - POISON SPYDER
PS 57-63-515
Price: $69.99

The Poison Spyder 3in X 30ft Recovery Strap is a must-have for every 4X4's onboard recovery kit. The strap is 30 feet long* and made of 3in* military grade nylon fabric that is designed to stretch 20% when in use, which assists with multiplying momentum when towing stuck vehicles out of a sticky situation.

Other, more rigid materials tend to jerk when the strap goes tight on a full-throttle pull, potentially damaging both vehicles as well as bystanders. This Recovery Strap is rated at 24,250 lbs. capacity, and the loop ends are protected with a nylon sheath. The strap is dyed black to easily identify it as Poison Spyder quality, sewn with red thread, red loop end protectors and red protective sleeves, labeled with the Poison Spyder logo.

Keep one of these and a couple of our 3/4" RECOVERY SHACKLES in your tool kit, and you can get yourself or your buddies out of just about any sticky situation.

FIRE EXTINGUISHER HOLDER - POISON SPYDER
PS 57-62-110
Price: $26.99

The Poison Spyder Fire Extinguisher Holder easily mounts to any roll cage tube or other suitable location, and securely holds a standard 2.5 lb. automotive fire extinguisher (up to 12" long). Made of high quality nylon webbing with an rubberized Poison Spyder emblem. NOTE: The velcro straps that hold this unit to the roll bar are optimally sized for use on padded roll bars. When using on bare, un-padded tubes (1.75" OD or larger recommended), the ends of the velcro straps wlll be too long, but can either be tucked in or cut off (use a lighter to cauterize the cut edge of the nylon webbing).

GRAB HANDLES - UNIVERSAL  - POISON SPYDER
PS 57-63-200
Price: $32.99

The Poison Spyder Grab Handle easily mounts to any roll cage tube and provides a safe grab handle to either help you get into the vehicle or hold yourself in place while bouncing down the trail. Universal fit for both bare cage tubes and padded cages. Made of high quality nylon webbing with Poison Spyder tag. Price is for two (2) Grab Handles.

DEFENDER "SPYDER" SIDE INSERTS - POISON SPYDER
PS 14-02-051
Price: $40.99

Complete your Poison Spyder DeFender installation with these "Spyder" Side Inserts, which fill the access holes in the side panels of the DeFender. DeFender "Spyder" Side Inserts are CNC laser cut from 1/8" aluminum plate. The Spyder logo cut-out acts as an air vent to promote airflow through the engine bay. If a solid wall is preferred, the Spyder Side Inserts can be stacked with the solid inserts that came with your DeFenders.

This product ships as bare aluminum it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

DEFENDER FULL LENGTH SIDE PLATES - POISON SPYDER
PS 14-02-052
Price: $139.99

DeFender Full Length Side Plates do more than just cover the access hole in the side of the DeFenders they also provide armor protection to the side of the Jeep's tub, from the fender flare to the door opening, and from the top of the Rocker Knockers up to the hood line. These Full Length Side Plates also provide extra bracing for the DeFenders against frontal impacts, helping to prevent buckling of the weaker, stock tub sheetmetal just rearward of the armored fender. DeFender Full Length Side Plates are CNC laser cut from 3/16" 6061-T6 aluminum plate. Bolt holes are countersunk so that the supplied flat head stainless steel hardware lies flush with the plate's surface. The forward edge is cut to fit the enlarged wheel opening of Poison Spyder DeFenders, while the lower edge is is cut to nest against Poison Spyder Rocker Knockers or Ricochet Rockers (NOTE: the angle of the forward edge of the Full Length Side Plates may not precisely align with the forward edge of older versions of Rocker Knockers and Ricochet Rockers newer, DeFender specific Rocker Knockers or Ricochet Rockers are designed to match the angle of this forward edge more closely).

This product ships as bare aluminum it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

DEFENDER XC FULL LENGTH SIDE PLATES - POISON SPYDER
PS 14-02-090-P04
Price: $149.99

DeFender XC Full Length Side Plates do more than just cover the access hole in the side of the DeFender XC's they also provide armor protection to the side of the Jeep's tub, from the fender flare to the door opening, and from the top of the Rocker Knockers up to the hood line. These Full Length Side Plates also provide extra bracing for the DeFenders against frontal impacts, helping to prevent buckling of the weaker, stock tub sheetmetal just rearward of the armored fender. DeFender Full Length Side Plates are CNC laser cut from 3/16" 6061-T6 aluminum plate. Bolt holes are countersunk so that the supplied flat head stainless steel hardware lies flush with the plate's surface. The forward edge is cut to fit the enlarged wheel opening of Poison Spyder DeFender XC's, while the lower edge is is cut to nest against Poison Spyder Rocker Knockers or Ricochet Rockers (NOTE: the angle of the forward edge of the Full Length Side Plates may not precisely align with the forward edge of older versions of Rocker Knockers and Ricochet Rockers newer, DeFender specific Rocker Knockers or Ricochet Rockers are designed to match the angle of this forward edge more closely).This product ships as bare aluminumit will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

DEFENDER XC "SPYDER" SIDE INSERTS - POISON SPYDER
PS 14-02-090-P05
Price: $50.99

Complete your Poison Spyder DeFender XC installation with these "Spyder" Side Inserts, which fill the access ports in the side panels of the DeFender XC. These DeFender XC Side Inserts are CNC laser cut from 1/8" aluminum plate. The Spyder logo cut-out acts as an air vent to promote airflow through the engine bay. The Side Inserts are designed to bolt to the inside surface of the DeFender XC, using the supplied stainless steel button head hardware. Side Inserts are sold in pairs, and sold separately.

This product ships as bare aluminum you may want to have it painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" REAR WELD-ON DEFENDER FLARES (STEEL) - POISON SPYDER
PS 14-05-070
Price: $229.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. DeFender Flares are also available already welded to Poison Spyder Crusher Corners.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" REAR WELD-ON DEFENDER FLARES (ALUMINUM) - POISON SPYDER
PS 14-05-070-ALUM
Price: $359.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate aluminum for strength and light weight. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. Note that aluminum DeFender Flares may only be welded to aluminum Crusher Corners (or competitors' aluminum full corner armor). DeFender Flares are also available already welded to Poison Spyder Crusher Corners.

This product ships as bare aluminum it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

5" REAR WELD-ON DEFENDER FLARES (STEEL) - POISON SPYDER
PS 14-05-075
Price: $249.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength.

DeFender Flares are also available already welded to Poison Spyder Crusher Corners. This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" COMP-CUT REAR WELD-ON DEFENDER FLARES 093 (STEEL) - POISON SPYDER
PS 14-05-093
Price: $209.99

These "Comp-Cut" DeFender Flares are designed to match Poison Spyder's front DeFenders with 3" Flare. They are intended to be welded on to your existing Poison Spyder Comp-Cut Crusher Corners or other manufacturer's or DIY comp-cut corners. Note that we offer two different styles of Comp-Cut DeFender Flares. Consult the product information below to determine which works best for your application.

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength.

DeFender Flares are also available already welded to Poison Spyder Crusher Corners. This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" COMP-CUT REAR WELD-ON DEFENDER FLARES 094 (STEEL) - POISON SPYDER
PS 14-05-094
Price: $209.99

These "Comp-Cut" DeFender Flares are designed to match Poison Spyder's front DeFenders with 3" Flare. They are intended to be welded on to your existing Poison Spyder Comp-Cut Crusher Corners or other manufacturer's or DIY comp-cut corners. Note that we offer two different styles of Comp-Cut DeFender Flares. Consult the product information below to determine which works best for your application.

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength.

DeFender Flares are also available already welded to Poison Spyder Crusher Corners. This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" COMP-CUT REAR WELD-ON DEFENDER FLARES 094 (ALUMINUM) - POISON SPYDER
PS 14-05-094-ALUM
Price: $329.99

These "Comp-Cut" DeFender Flares are designed to match Poison Spyder's front DeFenders with 3" Flare. They are intended to be welded on to your existing Poison Spyder Comp-Cut Crusher Corners or other manufacturer's or DIY comp-cut corners. Note that we offer two different styles of Comp-Cut DeFender Flares. Consult the product information below to determine which works best for your application.

DeFender Flares are designed to match Poison Spyder's front DeFenders. These weld-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate aluminum, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength.

DeFender Flares are also available already welded to Poison Spyder Crusher Corners. This product ships as bare aluminum it will need to be painted or powder coated after being welded on to Crusher Corners, prior to final installation. We do not offer a powder coat option for this item.

3" REAR BOLT-ON DEFENDER FLARES (STEEL) - POISON SPYDER
PS 14-05-B70
Price: $349.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These bolt-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. This bolt-on version of the DeFender Flare features a CNC laser cut 3/16" mounting plate with countersunk holes so the bolt heads are flush.

Available in steel or aluminum (aluminum coming soon), Rear Bolt-On DeFender Flares make it possible to use a variety of different corner armor and flare combinations. For example, those wishing to save weight but still needing the toughness of a steel rub rail, may opt to install aluminum Crusher Corners with steel DeFender Flares. They also make it possible to retrofit steel flares on to existing flare-less corner guards without welding. The bolt pattern matches the stock TJ flare bolt pattern, meaning they will bolt to our "stock" configuration TJ Crusher Corners without drilling. While they are designed to fit the larger TJ style wheel opening, these may also be used on YJ's and CJ's, where a larger wheel opening and flare is desired. While these may be mounted directly to the Jeep's sheet metal body without any corner protector, we do not recommend doing so. We recommend bolting it to full corner protectors that are at least 1/8" thick, and preferably 3/16".

Poison Spyder Rear DeFender Flares are also available in a weld-on configuration, or already welded to Poison Spyder Crusher Corners.This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

3" REAR  BOLT-ON DEFENDER FLARES (ALUMINUM) - POISON SPYDER
PS 14-05-B70-ALUM
Price: $459.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These bolt-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. This bolt-on version of the DeFender Flare features a CNC laser cut 3/16" mounting plate with countersunk holes so the bolt heads are flush.

Available in steel or aluminum (aluminum coming soon), Rear Bolt-On DeFender Flares make it possible to use a variety of different corner armor and flare combinations. For example, those wishing to save weight but still needing the toughness of a steel rub rail, may opt to install aluminum Crusher Corners with steel DeFender Flares. They also make it possible to retrofit steel flares on to existing flare-less corner guards without welding. The bolt pattern matches the stock TJ flare bolt pattern, meaning they will bolt to our "stock" configuration TJ Crusher Corners without drilling. While they are designed to fit the larger TJ style wheel opening, these may also be used on YJ's and CJ's, where a larger wheel opening and flare is desired. While these may be mounted directly to the Jeep's sheet metal body without any corner protector, we do not recommend doing so. We recommend bolting it to full corner protectors that are at least 1/8" thick, and preferably 3/16".

Poison Spyder Rear DeFender Flares are also available in a weld-on configuration, or already welded to Poison Spyder Crusher Corners.This product ships as bare aluminumit will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

5" REAR BOLT-ON DEFENDER FLARES (STEEL) - POISON SPYDER
PS 14-05-B75
Price: $369.99

DeFender Flares are designed to match Poison Spyder's front DeFenders. These bolt-on DeFender Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. This bolt-on version of the DeFender Flare features a CNC laser cut 3/16" mounting plate with countersunk holes so the bolt heads are flush.

Poison Spyder Rear DeFender Flares are also available in a weld-on configuration, or already welded to Poison Spyder Crusher Corners.This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

DIY REAR STINGER TIRE CARRIER - POISON SPYDER
PS 14-13-010
Price: $635.99

The Poison Spyder Rear Stinger Tire Carrier is the ultimate rear bumper for hard core rock crawling. Like many Poison Spyder original designs, the Rear Stinger concept has been copied by many manufacturers, but none come close to the quality, function, performance and awesome appearance of original. Built for light weight, high clearance, ease of use and a measure of rear-flop protection, the Poison Spyder Rear Stinger is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.

The Rear Stinger is basically a fold-down spare tire carrier. By pulling the two upper pins, the tire carrier can swing down, making loading and unloading of ehuge off-road tires easier. Simply roll the tire up into the carrier, secure it with the provided 3-Way Spare Tire Strap, then swing the carrier back up and pin it in place. The main components are fabricated from NC-bent DOM tubing and CNC laser-cut plate steel.

This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate. This would be useful for those who would like to use the Poison Spyder Rear Stinger with their existing bumper, or for adapting it for use on Jeep models and other 4X4's for which we do not yet make a model-specific kit. We provide mounting tabs to attach the Stinger to your bumper or mounting plate of choice. Note that the upper attachment arms are located at the correct width and height for mounting to a TJ without a body lift. If you are using this kit with other vehicles you may wish to have us ship the kit with the arms un-welded, so that you may weld them in at your custom width/height during installation. If you would like the arms un-welded, please make a note of it in the comments section when ordering.The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo. It also has an integrated license plate mount located in the center of the carrier. Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.

The Upper Corner Mounts are designed to work with or without Poison Spyder Crusher Corners for TJ, LJ, YJ and CJ. (we recommend using them with Crusher Corners). They mount using the bolt locations already in place for your Crusher Corners. The left side Upper Corner Mount includes a convenient CB antenna mount. The Tire Carrier attaches to the Upper Corner Mounts using urethane bushings and easy-to-remove hitch pins.

The Poison Spyder 3-Way Spare Tire Strap securely holds the spare tire in place during the most rigorous four-wheeling. The use of a strap allows virtually infinite adjustability for any size tire, while allowing quick, easy access to the spare tire without having to use any extra tools. All of these reasons are why similar straps are routinely used for spare tire hold-down duty in off-road racing. Heavy duty ratchet lets you easily adjust, tighten and release tension. Made of high quality nylon webbing with an embroidered Poison Spyder tag.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.IMPORTANT NOTE: This item is shipped on a pallet via truck freight. Shipping will NOT be calculated by this shopping cart. We will contact you to verify the shipping costs before processing your order (your card will not be charged until you have been notified of and agreed to the shipping costs).

1 2