Poison Spyder stuff is built for the hardcore Jeep enthusiast. Poison Spyder builds high end bumpers, armor and accessories that was developed from years of rock-crawling and buggy building.
We carry the complete line of Poison Spyder products. If you do not see what you are looking for, call us at 1-800-847-3287.   
 
 
Displaying 25 - 47 of 47 results
CAGE GRAB HANDLES (2) - POISON SPYDER
PS 14-19-020
Price: $45.99

Easily add entry grab handles to your Jeep's cage. These handles come pre-bent, and laser-notched for a perfect fit on Poison Spyder's Trail Cages and Full Cage Kits for YJ, TJ and LJ. They should fit just about any other manufacturer's cages, or home-built cages for these and other Jeep models, with minor fitting of the notched ends. Made of high strength 1.25" X .120 DOM tubing. Requires welding.

MACHINED SEATBELT BUNG - POISON SPYDER
PS 14-19-031
Price: $11.99

Securely add a seatbelt mount point to your cage with these machined steel seatbelt bungs. They are CNC machined from billet steel, with 7/16-20 female threads and an anti-pull-through lip on the back end. Simply cross-drill a hole through the cage tube and weld the bung in. Sized to work with 1.75" OD tubing. These are most commonly used for the shoulder belt mount point but can also be used for aftermarket lap belts. They may also be used for mounting hi-lift jacks and other equipment to the cage, bumpers, etc. SOLD BY EACH (if you need a pair of them, order two).

CRAWLER DOOR SKINS - POISON SPYDER
PS 14-27-010
Price: $98.99

Poison Spyder Crawler Door Skins convert your Bestop soft half doors into rugged, steel-clad trail doors for your '76 to '06 CJ-7, CJ-8, TJ, YJ and LJ Unlimited. They are CNC laser cut from 14 gauge steel, and unlike a factory door, can be easily repaired if damaged. Additionally, steel skins can provide off-road protection for you and your passengers that fabric cannot.

Poison Spyder Crawler Door Skins are designed to be welded to the Bestop half door frame after the fabric has been removed. The original door frame, latching mechanism, and mounts are used and remain in their stock position. Download the Installation Instructions to see how the Door Skins are assembled. Note that Poison Spyder Crawler Door Skins are made for Bestop half doors for '76 to '06 CJ-7, CJ-8, TJ, YJ and LJ Unlimited only. Also be aware that Crawler Door Skins do not provide a tight seal around the door jamb like the original soft door.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

TORX T-50 TAMPER-PROOF DRIVER BIT - POISON SPYDER
PS 14-58-010
Price: $6.99

The Torx T-50 Tamper-Proof Driver Bit is required for removal and replacement/reinstallation of the factory windshield spreader bars. This is necessary during install of Poison Spyder's Trail Cage kits for TJ/LJ and others.

Good Value For the Price, a Poison Spyder Hood Louver is one of the best bang-for-your-buck improvements you can do for your Jeep. Compare that to the cost of a complete replacement hood with vents, such as those from AEV, and its easy to see what a great value the Poison Spyder product is.

TRUCKLITE 7" ROUND LED HEADLAMP - POISON SPYDER
PS 41-02-270
Price: $299.99

Improve your Jeep's headlamp performance with these 7" Round LED Headlamps with complex reflector optics! These advanced LED headlamps from Trucklite are the state of the art in LED lighting, providing crisp, bright LED light with low amp draw. These headlamp assemblies can replace most 7" round OE headlamps, including those in Jeep JK, TJ and CJ! SOLD BY EACH (select quantity of 2 of you need a pair).

  • When properly mounted, exceeds FMVSS-108 and CMVSS-108 DOT requirements for low beam and high beam performance
  • Excellent option for light, medium and heavy-duty trucks, off-road vehicles, classic cars, motorcycles and more.
  • Metalized reflector optics provide a lighting experience that smooth and clean across the driving surface
  • Provides a brighter, crisper and whiter light output, closer to the color temperature of daylight, dramatically improving light projection distance and overall visibility
  • Durability and dependability of LED lighting provides a solid-state, bulb-free headlamp design that impervious to damage from shock and vibration
  • Military grade, die-cast aluminum housing and non-yellowing, polycarbonate lens offer optimum protection against damage from impact, roadside debris and other hazards
  • Electronics are sealed in epoxy to resist from damage caused by corrosion or moisture
  • Advanced circuitry protects against voltage spikes up to 600v
  • Drop-in replacement for #6014, 6015, 6016, H6024 and Par 56 headlamp designs
  • Uses standard, H4, 3-blade wiring connector
  • Equipped with Truck-Lite 3-Year Limited Warranty.
  • Poison Spyder includes Trucklite's H4 to H13 Adapter Harness 96630 (required for use in Jeep JK and other vehicles with an H13 headlamp socket)

Material:

  • Hard-coated polycarbonate lens
  • eCoat aluminum housing and internal structures
  • Metalized Reflector
  • 16 Gauge Wire

Light Source:

  • 2 LED Arrays
  • 9v-33v Multi-volt design works with both 12v and 24v systems

Designed At:

  • 12.8v, 1.80a (low beam), 3.60 amps (high beam)
  • 25.6v, 1.00a (low beam), 1.80 amps (high beam)
  • 1,300 Lumens

Additional Specifications:

  • Operating temperature range: -40?C to 50?C
  • Overvoltage protection to 600v, w/constant output
  • Mechanical aim

3/4" LED MARKER LAMP - 2-WIRE - CLEAR/AMBER - POISON SPYDER
PS 41-02-285
Price: $28.99

LED marker lamp or turn signal for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you'd like to mount them by drilling a 3/4" hole in a flat panel. This is a TWO WIRE assembly, meaning it can be used as either a turn signal OR a marker lamp, but NOT as both. These high quality LED lamps are DOT-approved for use on your vehicle. Beware of cheaply made LED's that do not carry the DOT approval. Choose your lens color from: amber, red or clear (clear lens includes amber diode, so it shines amber when lit up). Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair).

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. In most cases it will require wiring alterations.

4" 6-LED TAILLIGHT FLANGE STYLE - POISON SPYDER
PS 41-04-036
Price: $35.99

6-diode flush mount LED taillight with red lens for use with Poison Spyder Customs Crusher Corners, Trail Corners or any other manufacturer's corner protectors, or anywhere you can cut a 4-1/2" hole in a flat sheetmetal panel. Flange-mounting style, red lens. Sold by each, if you need a pair specify a quantity of 2.

4" 24-LED TAILLIGHT PUSH-IN WITH PIGTAIL AND GROMMET - RED - POISON SPYDER
PS 41-04-050
Price: $30.99

These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4" round light (requires a 4-1/2" hole) with red lens. Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the "options") units with clear lenses use red diodes, so they still flash red when lit up. These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer's corner protectors or anywhere you can cut a 4-1/2" round hole in a flat panel. Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).

4" 24-LED TAILLIGHT PUSH-IN W/ PIGTAIL AND GROMMET-CLEAR/RED - POISON SPYDER
PS 41-04-051
Price: $30.99

These 24-diode LED taillights easily install using a rubber grommet they simply push into place. This is a 4" round light (requires a 4-1/2" hole) with red lens. Flush-mount LED taillights stay out of the way of rocks and trees on the trail, last longer and shine brighter than OEM incandescent lamps. Available with red or clear lens (make your selection in the "options") units with clear lenses use red diodes, so they still flash red when lit up. These install right into Poison Spyder Customs Crusher Corners or Trail Corners (on units specifically ordered for LED taillights), or can be installed into other manufacturer's corner protectors or anywhere you can cut a 4-1/2" round hole in a flat panel. Includes the LED lamp assembly, rubber grommet and wiring pigtail harness. Sold each (order 2 if you need a pair).

RECTANGULAR LED MARKER LAMP - AMBER - POISON SPYDER
PS 41-04-203
Price: $30.99

This rectangular LED Marker Lamp is the solution for those who need to run a combination marker lamp and turn signal in the same unit. This may be necessary on Jeeps where the OE turn signals and/or marker lamps were removed in order to install aftermarket armored fenders such as Poison Spyder DeFenders. Unlike our 3/4" Round LED Marker Lamp, these are a 3-wire lamp which can perform two separate functions (minor and major or typically, marker lamp and turn signal).

For those needing a combination marker lamp/turn signal to satisfy local legal requirements, the small rectangular shape makes this lamp the ideal size to mount along the outer edge of the Poison Spyder DeFender. Installation requires simply drilling a 3/8" hole, thoroughly cleaning the mounting surface, peeling back the adhesive cover, pusing the wires through the hole then firmly pressing to set the adhesive, then making the wiring connections.

Note that this is a surface-mount lamp. If mounting on the outer edge of the Poison Spyder DeFenders, it may serve to satisfy local DMV/DOT requirements, however it will be mounted in a vulnerable spot if your Jeep is wheeled hard in tight situations. DeFenders are designed as trail armor, and are intended to be rubbed along the rocks, trees, etc., which would of course damage this lamp if mounted along the outer surface. The lamp may be mounted in more protected areas by either drilling a hole or fabricating a simple mounting bracket, at the installer's discretion.

Features & Benefits

  • Lamps operate in minor and major output levels; major function activated by the brake function or turn signal
  • Major function is 3 times brighter than minor function (amber)
  • Red Major function is 7 times brighter than minor function
  • Provides marker/clearance solution that requires no mounting brackets or installation screws
  • Lamps adhere directly to application surface through use of heavy-duty adhesive backing
  • P2-Rated
  • Electronics are completely sealed in epoxy to resist damage caused by moisture and corrosion
  • Easy-to-install peel-off liner
  • Rear exit wire version requires a 3/8" mounting hole, and self-seals hole upon installation

Construction

  • Polycarbonate Lens
  • Over-Molded Housing
  • Encapsulated Circuitry
  • 20 Gauge Wire

Light Source

  • 3 Light Emitting Diodes (LED)
  • Designed at 13.5v
  • (Minor)0.004A - 0.015A
  • (Major)0.048A - 0.068A

LED LICENSE PLATE AND 3RD BRAKE LIGHT  - POISON SPYDER
PS 41-04-406
Price: $49.99

This kit makes it easy to mount a combination license plate and 3rd brake light to your license plate. LED's provide bright light with low power draw. Mounts to the two upper license plate bolts. Electrical connectors are included, however extra wire may be required depending on your mounting location. This part number includes a 6-foot wiring harness extension with weatherpak connector, for relocating the license plate to the spare tire carrier or other locations that are far from the OE location.

LED LICENSE PLATE AND 3RD BRAKE LIGHT - GENERIC CONNECTORS - POISON SPYDER
PS 41-04-LP1
Price: $39.99

This kit makes it easy to mount a combination license plate and 3rd brake light to your license plate. LED's provide bright light with low power draw. Mounts to the two upper license plate bolts. Electrical connectors are included, however extra wire may be required depending on your mounting location. This part number includes a short pigtail, suitable for use when the license plate is mounted at or near the stock location.

LED LICENSE PLATE AND 3RD BRAKE LIGHT - 6 EXTENSION HARNESS - POISON SPYDER
PS 41-04-LP6
Price: $49.99

This kit makes it easy to mount a combination license plate and 3rd brake light to your license plate. LED's provide bright light with low power draw. Mounts to the two upper license plate bolts. Electrical connectors are included, however extra wire may be required depending on your mounting location. This part number includes a 6-foot wiring harness extension with weatherpak connector, for relocating the license plate to the spare tire carrier or other locations that are far from the OE location.

24IN LED BACK-UP LIGHT EXTENSION HARNESS PAIR - POISON SPYDER
PS 41-06-020
Price: $39.99

Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.

Exclusive "Plug-N-Play" Design Poison Spyder's wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep's customized rear lighting setup. The JK LED Taillight Harness - Driver Side is typically used on the driver's side and does not include provisions for the license plate light. The JK LED Taillight Harness - Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light - PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for most configurations. Each of these Taillight Harnesses plug right into your Jeep's factory wiring harness simply unplug the stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.

Supports 4" Round LED Taillights both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4" Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle's computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors. NOTE: The LED taillight connector is designed to work with the 4" round LED Taillights sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of taillight.

Supports 2-1/2" Round LED Back-Up Lamps both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2" Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4" Back-Up Light Extension Harness on each side. To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24" Back-Up Light Extension Harness on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accomodate both a 4" and a 24" Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle's back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you'll have to research and make the necessary alterations to the harness and the vehicle's wiring on your own. NOTE: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2" Round LED Back-Up Lamps sold by Poison Spyder only. They are not guaranteed to fit any other brand or model of lamp.

Supports LED License Plate & Third Brake Light the passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate & 3rd Brake Light - PSC Connectors. On most Jeep JK's on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the stock position on the driver's side corner. In most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body's corner cavity, secured with some zip-ties. NOTE: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light - PSC Connectors sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of license plate light or third brake light.

4IN LED BACK-UP LIGHT EXTENSION HARNESS PAIR - POISON SPYDER
PS 41-06-030
Price: $29.99

Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder.

Exclusive "Plug-N-Play" Design Poison Spyder's wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep's customized rear lighting setup. The JK LED Taillight Harness - Driver Side is typically used on the driver's side and does not include provisions for the license plate light. The JK LED Taillight Harness - Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light - PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for most configurations. Each of these Taillight Harnesses plug right into your Jeep's factory wiring harness simply unplug the stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.

Supports 4" Round LED Taillights both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4" Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle's computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors. NOTE: The LED taillight connector is designed to work with the 4" round LED Taillights sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of taillight.

Supports 2-1/2" Round LED Back-Up Lamps both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2" Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4" Back-Up Light Extension Harness on each side. To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24" Back-Up Light Extension Harness on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accomodate both a 4" and a 24" Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle's back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you'll have to research and make the necessary alterations to the harness and the vehicle's wiring on your own. NOTE: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2" Round LED Back-Up Lamps sold by Poison Spyder only. They are not guaranteed to fit any other brand or model of lamp.

Supports LED License Plate & Third Brake Light The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to ouLED License Plate & 3rd Brake Light - PSC Connectors. On most Jeep JK's on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the stock position on the driver's side corner. In most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body's corner cavity, secured with some zip-ties. NOTE: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light - PSC Connectors sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of license plate light or third brake light.

LED LICENSE PLATE AND 3RD BRAKE LIGHT - PSC CONNECTORS - POISON SPYDER
PS 41-06-040
Price: $44.99

This LED license plate and 3rd brake light is made to connect directly to Poison Spyder's proprietar JK LED Taillight Harness - Passenger Side. It is part of a complete series of LED lighting and wiring products which work seamlessly together and simply snap into your Jeep's wiring harness without cutting or splicing. LED's provide bright light with low power draw. Mounts to the two upper license plate bolts. This unit comes with Poison Spyder's proprietary weatherproof wiring connection system.

CAGE GUSSETS 90-DEGREES - WEB 2 - POISON SPYDER
PS 43-43-001-W
Price: $18.99

Add strength as well as killer Poison Spyder looks to your cage with these Spyder Web design cage gussets. Gussets are CNC laser-cut from 3/16" plate steel. This part number is for gussets that fit a 90° tubing joint. Includes two (2) gussets.

CAGE GUSSETS CURVED - WEB 2 - POISON SPYDER
PS 43-43-011-W
Price: $18.99

Add strength as well as killer Poison Spyder looks to your cage with these Spyder Web design cage gussets. Gussets are CNC laser-cut from 3/16" plate steel. This part number is for gussets that fit where a straight tube joins a curved tube, as with the upper B-Pillar joint on Poison Spyder Full Cage Kits. Includes two (2) gussets.

CAGE GUSSETS 100-DEGREES - WEB 2 - POISON SPYDER
PS 43-43-014-W
Price: $18.99

Add strength as well as killer Poison Spyder looks to your cage with these Spyder Web design cage gussets. Gussets are CNC laser-cut from 3/16" plate steel. This part number is for gussets that fit a 100° tubing joint. Includes two (2) gussets.

ROLLER FAIRLEAD LIGHT MOUNT - POISON SPYDER
PS 45-28-010
Price: $29.99

Poison Spyder Roller Fairlead Light Mount provides winch-equipped vehicles with two additional auxiliary light mounting locations. The Roller Fairlead Light mount attaches to the top of most roller winch fairleads and is designed to accept most aftermarket auxiliary lights. This may be beneficial for Jeeps equipped with aftermarket bumpers such as Poison Spyder Stingers and BFH bumpers, which may displace auxiliary lights which were previously bumper-mounted.

The Mount is CNC laser-cut from 3/16" plate steel and powder-coated a textured black finish for long-lasting great looks and corrosion resistance. Installation is extremely simple, requiring only simple tools (and minor drilling for the roller fairlead version). The Roller Fairlead Light Mount comes with stainless steel hardware and complete installation instructions.

D-RING SHACKLE TAB - POISON SPYDER
PS 45-42-010
Price: $32.99

The Poison Spyder D-Ring Shackle Tab allows fabricators to easily add a super-tough recovery attachment point to any structural member of the vehicle. CNC machined from 1" thick plate steel, these Shackle Tabs feature chamfered edges for maximum weld penetration and a quality, finished appearance. The tab is specifically designed to accet a 3/4" D-ring shackle. Sold by the piece.

ROCKBRAWLER HI-LIFT JACK MOUNT - POISON SPYDER
PS 45-61-010
Price: $75.99

This accessory makes it easy to mount a Hi-Lift jack to your Poison Spyder RockBrawler Rear Bumper with Tire Carrier. The mount plate is CNC laser cut from 3/16" plate steel, with an unmistakable Spyder web design. The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware. Your Hi-Lift jack attackes to the mount plate with a pair of heavy duty 1/2" carriage bolts with urethane isolator bushings. We provide both wing nuts and nylock nuts so you can choose which to use to fasten your Jack to the mount. The RockBrawler Hi-Lift Jack Mount comes bare steel so you may paint or powder coat in the color of your choice.

IMPORTANT: This product is designed for use with the RockBrawler Rear Bumper with Tire Carrier. If you have a RockBrawler Rear Bumper with Tire Carrier, you need our Rock Brawler Hi-Lift Jack Mount instead.

HI-LIFT JACK MOUNT HARDWARE KIT - POISON SPYDER
PS 45-61-010-HW
Price: $15.99

Use this hardware kit to easily mount a Hi-Lift Jack to the Poison Spyder JK Body Mounted Tire Carrier.

1 2