The current JK models are the most technologically advanced Jeeps ever built, achieving new levels of comfort, quality and performance right from the factory.


Poison Spyder stuff is built for the hardcore Jeep enthusiast. Poison Spyder builds high end bumpers, armor and accessories that was developed from years of rock-crawling and buggy building.
We carry the complete line of Poison Spyder products. If you don't see what you are looking for on our site, give us a call at 1-800-847-3287. 
 
 
Displaying 1 - 22 of 22 results
JK TRAMP STAMP II (WIDE VENT) - POISON SPYDER
PS 18-04-012-01
Price: $49.99

The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate to complete the Poison Spyder gear surrounding your Jeep JK. The center of the Tramp Stamp II is cut out to allow the tailgate vents to function properly. The Tramp Stampe II is easily mounted using the stock spare tire carrier bolts (no drilling required). This part is CNC laser cut from 1/8" aluminum plate, and is powder coated in a textured black finish.

The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.

NOTE: This item fits JK''s with the WIDE VENT on the tailgate (vent is wider than it is tall). These are generally found on 2010 and newer JK''s, however they have also been found on some 2009''s. This item is not a direct fit for JK''s with the TALL tailgate vent (taller than it is wide), which were typically found on 2007-2009 JK''s. On Jeeps with vertical tall vent, this item may be used if the vent assembly is either removed or trimmed to fit. Regardless of your year model, we strongly advise that you visually verify which vent your JK is equipped with before ordering (will require removal of the stock spare tire mount).

JK LICENSE PLATE MOUNT (WIDE VENT) - POISON SPYDER
PS 18-04-012-02
Price: $29.99

The Poison Spyder JK License Plate Mount allows you to relocate your Jeep''s license plate to the center of the tailgate, for those who run without a tailgate-mounted spare tire. The License Plate Mount uses four of the OE spare tire mount bolts, and is offset to allow proper function of the tailgate vents. The JK License Plate Mount is available separately or in a bundle with the Tramp Stamp II. If using this item to relocate the license plate, we also recommend using the LED License Plate Light and the Stock License Plate Delete Cover.

NOTE: This item was designed to fit JK''s with the WIDE VENT on the tailgate (vent is wider than it is tall). These are generally found on 2010 and newer JK''s, however they have also been found on some 2009''s. This item may also be used on JK''s with the TALL tailgate vent (taller than it is wide), which were typically found on 2007-2009 JK''s, however the edges of the vent may still be visible above and below the license plate.

JK 4-DR ROCKER KNOCKERS - BODY MOUNTED - POISON SPYDER
PS 18-08-020
Price: $605.99

The most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JK''s rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep''s trail performance while adding rugged off-road looks to your JK.

Poison Spyder JK Rocker Knockers are engineered for brute strength and impact resistance by attaching to the Jeep''s body in 14 strategic bolt locations. The mounting plate is CNC laser cut from 3/16" plate steel and precision brake-formed for a perfect fit. The tubular rocker rail is rugged 1.75" X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5" X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a CNC laser-cut Slider Skid. The Skid features Poison Spyder''s exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The Slider and Skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep''s doors and body a safe distance from higher level trail hazards.

Another quality element of the Poison Spyder Rocker Knocker is the ability to remove the outer slider skid. The outer skid is built from 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. The Slider does not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders to match your Jeep, and to easily be able to remove it for re-finish.

Poison Spyder JK Rocker Knockers are compatible with all known suspensions and body lifts, including long arm kits. Because the Rocker Knockers mount directly to the Jeep''s body tub, they will lift with the body when a body lift is installed (competitors'' frame-mounted rocker guards may leave a gap on body-lifted vehicles). As an added attribute the Rocker Knocker mounting plate is designed with drain reliefs to discourage debris from collecting in the lower body cavity.

Poison Spyder JK Rocker Knockers can be utilized as a stand alone component or can be used in conjunction with Poison Spyder''s JK Body Armor. JK Body Armor is a secondary line of defense against off road damage to your Jeep, protecting the Jeep by reaching above the Slider level up to the door line. Rocker Knockers do not mount or use the Body Armor for additional structure.

JK 4-DR ROCKER KNOCKERS - FRAME MOUNTED - POISON SPYDER
PS 18-08-030
Price: $605.99

The most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JK''s rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeep''s trail performance while adding rugged off-road looks to your JK. These Frame-Mounted Rocker Knockers are identical to our Body-Mounted version, except in how they mount. Which one is best for you will depend on how you intend to use your Jeep!

Product Description DOM Tube Construction the tubular rocker rail is rugged 1.75" X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5" X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a 3/16" thick CNC laser-cut steel base plate for the removable slider skid. The slider and skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeep''s doors and body a safe distance from higher level trail hazards.

Removable Slider Skid the removable slider skid features Poison Spyder''s exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The outer skid is made of 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. The Slider does not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Slider''s color to match your Jeep''s body color, or any color you choose.

Frame-Mounted Rocker Knockers attach to your Jeep''s frame rails through three rugged, precision engineered outriggers on each side. The outriggers are fabricated of CNC laser cut 3/16" thick plate steel, and are designed in a triangular shape to act as their own gusset and provide superior strength. The outrigger wraps around the bottom and side of the frame rail for support on two planes. The outriggers are also located so they may be directly bolted to the sides of the Jeep''s body mounts for even more strength. Compare this design to competitors'' frame-mounted sliders that use a simple piece of non-triangulated, non-gusseted tubing welded to a plate that attaches to the side of the Jeep''s frame rail.

Bolt-On or Weld-On installation instructions and hardware are provided for a fairly easy bolt-on installation of the Frame-Mounted Rocker Knockers. The procedure uses some existing mounting holes on your Jeep''s frame, but does require some additional drilling and tapping. Alternatively, installers may choose to weld the Rocker Knockers in place. Please note, however, that reaching the nuts on the back-side of the slider plate for installation of the removable skid will be more difficult with the Rocker Knockers already in place. We recommend testing the skid removal process with the Rocker Knockers bolted into place, before permanently welding them on.

Suspension & Body Lift Compatibility Frame-Mounted JK Rocker Knockers are not compatible with typical "long arm" suspension kits, without some Do-It-Yourself modifications. The rearward support outrigger will likely interfere with the location of most long-arm kit''s link brackets. For those wishing to install this product in conjunction with a long-arm kit, it may be possible to do so by ordering the Rocker Knockers with the rearward outrigger NOT welded to the Rocker Knockers, and then locating and welding them in place during installation. Also note that, as a frame-mounted product, any body lift installed on the Jeep will result in a gap of the same height, between the Rocker Knocker and the Jeep''s body tub.

JK 4-DR BRAWLER ROCKERS (STEEL) - POISON SPYDER
PS 18-08-200
Price: $805.99

Jeep JK''s, especially the long wheelbase 4-door Unlimited, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep''s off-road capability not to mention they look bad-ass!

Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece fits the lower section of your Jeep''s exterior sheetmetal like a glove, conforming to the sublte curvature of the JK and providing protection similar to Poison Spyder''s JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3" outboard of the Jeep''s body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate steel angles down and inward to form a high clearance boatside for sliding off of rocks and obstacles. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares.

The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep''s body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep the frame while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts.

Brawler Rockers are designed to handle a serious beating! They not only provide unmatched rocker protection, but they also provide a super strong pivot point which can help you to maneuver through tight obstacles. The boatside design will allow the Jeep to slide off of rocks and back onto the center of the trail. The protruding rub rail keeps vertical obstructions such as trees and rock walls a safe distance from the Jeep''s doors and other vulnerable body parts. And when you need to change a tire or perform an extraction, the Brawler Rocker provides a strong, convenient lifting point for your Hi-Lift jack.

Brawler Rockers ship as bare steel, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder''s JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed).

JK 4-DR BRAWLER ROCKERS (ALUMINUM) - POISON SPYDER
PS 18-08-200-ALUM
Price: $969.99

Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Features and construction are exactly identical to our Heavy Duty STEEL Brawler Rockers, the only exception being that these are fabricated from 3/16" thick aluminum plate rather than 3/16" steel. Aluminum would be preferred by those who want the bad-ass looks, entry step functionality, and an admittedly reduced measure of rocker armor protection, but with a very significant weight savings compared to the steel versions. For those who will be testing their Jeeps on tougher trails where frequent contact with the rocks is to be expected, we highly recommend opting for the steel versions. While the aluminum is a respectable 3/16" thick, it should not be expected to withstand the same amount of punishment that our steel Brawler Rockers can handle.

Brawler Rockers are two-piece "mini-boatside" style rocker armor. Each component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate. The upper piece fits the lower section of your Jeep''s exterior sheetmetal like a glove, conforming to the sublte curvature of the JK and providing protection similar to Poison Spyder''s JK Body Armor. The lower piece incorporates a rub rail/step that protrudes about 3" outboard of the Jeep''s body tub. The top surface of the rub rail may also serve as an entry step. Below, the brake-formed 3/16" plate material angles down and inward to form a high clearance boatside. Inside, an array of beefy 3/16" thick internal gussets provide extra strength to the Brawler Rocker. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate material, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares.

The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. All fastener holes are countersunk for a flat surface using the flat-head hardware. Underneath, the lower piece attaches at the Jeep''s body mounts. Attaching the Brawler Rockers in this way, along several different planes, provides triangulated strength to the entire assembly. The body-mount tie-ins ensure that they are securely integrated to the strongest structural component of the Jeep the frame while also allowing the Brawler Rocker to hug the body tub as closely as possible. Please note that Brawler Rockers are NOT compatible with body lifts.

Brawler Rockers ship bare, allowing you to paint or powdercoat in the color of your choice. Note that if you have previously installed Poison Spyder''s JK Body Armor, you will be able to re-use the existing nut-serts, saving a significant amount of installation time (Body Armor will have to be removed).

JK 4-DR BRAWLER ROCKERS (STEEL) - BLACK - POISON SPYDER
PS 18-08-200P1
Price: $925.99

NOTE: This item has just been launched and lead times may vary as our inital production runs are depleted to satisfy initial demand and to stock dealers and distributors. Please be aware that orders may not be able to ship immediately, and may take up to a couple of weeks to fulfill. If time is of the essence, please contact your favorite Poison Spyder dealer or call our sales department to verify lead times prior to ordering. Thank you for your understanding and patience.

Jeep JK''s, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep''s off-road capabilitynot to mention they look bad-ass! Brawler Rockers are two-piece "mini-boatside" style rocker armor which protects your Jeep''s body panels while functioning as a slider, pivot and entry step. This part number is for the all steel version which is perfect for those Jeeps that spend a lot of time in the big rocks (an aluminum version is also available). This product is finished in black with Poison Spyder''s proprietary SpyderShell Armor Coat process.

Product Description Rugged Steel Plate Construction each Brawler Rocker component is fabricated entirely of CNC-laser cut, precision brake-formed 3/16" plate steel. The upper piece attaches to the body tube using supplied stainless steel flat-head cap screws and nut-serts. The lower piece attaches to the upper piece also with stainless steel flat-head cap screws and easy-to-install clip-nuts. Inside, an array of beefy 3/16" thick internal gussets provide ultimate strength to the Brawler Rocker. All fastener holes are countersunk for a flat surface using the flat-head hardware. Oval lightning holes along the length of the boatside section provide great Poison Spyder looks while allowing access to hose out mud and debris after a day on the trail. The ends of the Brawler Rockers are capped in the same 3/16" plate steel, in angled facets that allow up to a 40" tire and visually integrate with the lines of Poison Spyder front and rear JK Crusher Flares.

SpyderShell Armor Coat is more than just powder coating it''s a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell products stay looking great for years. The SpyderShell process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black rather than traditional gray so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, "super-durable" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship.

2-Piece Design the upper piece of the Brawler Rocker assembly fits the rocker panel section of your Jeep''s exterior sheetmetal like a glove, conforming to the sublte curvature of the JK and providing protection similar to Poison Spyder''s JK Body Armor. The lower piece incorporates an extremely strong rub rail that protrudes about 3

3/4" LED MARKER LAMP - 3-WIRE - RED - POISON SPYDER
PS 41-04-070
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

3/4" LED MARKER LAMP - 3-WIRE - CLEAR/AMBER - POISON SPYDER
PS 41-04-080
Price: $19.99

The 3/4" round, Amber lens LED lamp for use as a combination turn signal and running lamp, for use with Poison Spyder Customs DeFenders, Tube Fenders, Crusher Flares, or anywhere you''d like to mount them by drilling a 3/4" hole in a flat panel. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These high quality LED lamps are DOT-approved for use on your vehicle. Includes pigtail harness and mounting grommet. Sold each (select a quantity of 2 if you need a pair). This item is also available in red or clear/amber.

IMPORTANT: This item is NOT intended as a direct replacement for any "stock" turn signal or marker lamp. It does not plug directly into the vehicle''s wiring harness it will require cutting and splicing into the vehicle''s wiring harness.

BOMBSHELL DIFF COVER - DANA 30 - BARE - POISON SPYDER
PS 42-11-030
Price: $89.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 30 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 30 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuringsimply fill the diff to the level of the fill hole.

The Bombshell differential cover is cast from highly ductile nodular ironthe same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyderour powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 30 - BLACK PC - POISON SPYDER
PS 42-11-030-PC
Price: $99.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 30 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 30 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyder our powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 44 - BARE - POISON SPYDER
PS 42-11-044
Price: $89.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 44 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 44 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Dana 44 Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. Click the icon at left to view our Install Instructions, and view the video on the right to see the installation process. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyder our powder coat option is just a single color (all black).

BOMBSHELL DIFF COVER - DANA 44 - BLACK PC - POISON SPYDER
PS 42-11-044-PC
Price: $99.99

Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, though less catastrophic, is "peel back" that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards.

Product Description the Dana 44 Bombshell can now be used on STOCK Jeep Wrangler JK and TJ, front or rear axles, with no requirement for aftermarket track bars or suspension modifications! Now you can install the Bombshell Dana 44 Diff Cover on to your bone stock Jeep, straight off the showroom floor! This re-design also includes moving the gear oil fill hole to the stock fluid level height so there''s no more research, guesswork or measuring simply fill the diff to the level of the fill hole.

The Dana 44 Bombshell differential cover is cast from highly ductile nodular iron the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick and up to 1" thick cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16" to a brutal 1/2" thick at the outermost surface.

Installing the Bombshell is fast and easy. The sealing surface has been CNC machined flat for a perfect seal. Poison Spyder provides a tube of silicon sealant and new Grade 8 hardware so you''ll have everything you need except for tools and gear oil.

Bombshells are shipped either bare so that you may powder coat or paint to suit your own preference, or powder coated semi-gloss black. NOTE: many of the photos below show where the customer has painted the raised area of the Spyder logo a contrasting color. This is NOT done by Poison Spyderour powder coat option is just a single color (all black).

HAWSE FAIRLEAD LIGHT MOUNT - POISON SPYDER
PS 45-28-020
Price: $35.99

Poison Spyder Hawse Fairlead Light Mounts provide winch-equipped vehicles with two additional auxiliary light mounting locations. The Hawse Fairlead Light Mount can be installed behind most Hawse-type winch fairleads, and is designed to accept most aftermarket auxiliary lights. This may be beneficial for Jeeps equipped with aftermarket bumpers such as Poison Spyder''s Trail Stinger, which may displace auxiliary lights which were previously bumper-mounted.

The Mount is CNC laser-cut from 3/16" plate steel and powder-coated a textured black finish for long-lasting great looks and corrosion resistance. Installation is extremely simple, requiring only simple tools. Complete installation instructions are included.

JK LIGHT BAR MOUNT (STEEL) - RIGID 50" LED - POISON SPYDER
PS 45-28-R50
Price: $249.99

The Poison Spyder JK Light Bar Mount is an easy, great-looking way to mount a Rigid Industries 50" E-Series or SR-Series LED light bar over the windshield of your Jeep JK Wrangler. Available in either steel (this part number) or light-weight aluminum, these Light Bar Mounts are CNC laser cut from 3/16" thick plate, then precision brake-formed and finish welded. The contoured, gusseted design provides the strength need to hold the massive Rigid 50" light bar securely in place on the highway or in rough terrain. Installation is simple, using the existing lower windshield bracket bolts. Rubber liners are provided to protect the Jeep's paint underneath the mounts. Mounts are shipped as bare steel or aluminum, ready for you to paint or powder coat in the color of your choice.

ROCKBRAWLER II HI-LIFT JACK MOUNT - POISON SPYDER
PS 45-61-011
Price: $75.99

This accessory makes it easy to mount a Hi-Lift jack to your Poison Spyder RockBrawler II Rear Bumper with Tire Carrier. The mount plate is CNC laser cut from 1/4" plate steel, with an unmistakable Spyder web design. The plate bolts to the top of the tire carrier using the supplied Grade 8 hardware. Your Hi-Lift jack attaches to the mount plate with a pair of heavy duty 1/2" carriage bolts with urethane isolator bushings. We provide both wing nuts and nylock nuts so you can choose which to use to fasten your Jack to the mount. The RockBrawler II Hi-Lift Jack Mount comes bare steel so you may paint or powder coat in the color of your choice.

IMPORTANT: This product is designed for use with the RockBrawler II Rear Bumper with Tire Carrier. If you have a RockBrawler Rear Bumper with Tire Carrier, you need our Rock Brawler Hi-Lift Jack Mount instead.

JEEP JK TRUNK GEAR BAG - POISON SPYDER
PS 57-17-100
Price: $39.99

The Poison Spyder Gear Bag is perfect for storing those essential items every 4X4 should carry on board. Made of heavy duty materials, this Gear Bag is a great place to put tool rolls, recovery gear, emergency and survival supplies. The bag features an extra wide, pleated opening for stowing large items, a heavy duty zipper with dual zipper pulls, and heavy duty nylon strap handles that circle the bag for extra support when hand carrying the bag. Black with a rubberized Poison Spyder logo stitched to the flap. The 22" X 8.5" X 5" Gear Bag was designed specifically to fit into the "trunk" area beneath the floor at the back of the Jeep JK, but it will work great in any 4X4.

JEEP JK 4DR FRONT/REAR CAGE GRAB HANDLES - SET OF 4 - POISON SPYDER
PS 57-63-210
Price: $49.99

The Poison Spyder Grab Handle easily mounts to any Jeep JK 4 Door roll cage tube and provides a safe grab handle to either help you get into the vehicle or hold yourself in place while bouncing down the trail. These grab handles fit for both bare cage tubes and padded cages. Made of high quality nylon webbing with Poison Spyder tag. Price is for four (4) Grab Handles.