Displaying 1 - 4 of 4 results
LJ CRUSHER CORNERS - "DADDY LONGLEGS" - 3" DEFENDER FLARES - POISON SPYDER
PS 15-04-043
Price: $774.99

Now you can build your LJ just like Daddy Longlegs! All of the armor that was custom-designed for this iconic stretched LJ is now available. These items require a 4" rear wheelbase stretch, and they allow up to a 40" tire. These "Daddy Longlegs" Crusher Corners are designed to provide for this wheelbase stretch, and also provide the added strength of true "wheel well to wheel well" (WW2WW) rocker protection (when used with "Dadddy Longlegs" special edition Rocker Knockers). The huge wheel opening is also moved up as high as possible for extreme clearance and allowing for extreme articulation while maintaining a Low Center Of Gravity (LCOG).

Crusher Corners The Ultimate Corner Armor Poison Spyder Crusher Corners protect your Jeep's vulnerable rear body corners by cladding them in rugged, high strength 3/16" plate steel armor. Crusher Corners are manufactured to hug the lines of your Jeep's body tub perfectly, forming a glove-fit with virtually no loss of valuable ground clearance. Crusher Corners are CNC laser cut from high strength 3/16" plate steel, and precision brake-formed in a single full-radius bend, for a perfect fit. Bolt holes are countersunk for the included stainless steel flat head hardware, which yields a flat, unobstructed surface to slide over obstacles. All mounting hardware is included as well as detailed installation instructions.

"Daddy Longlegs" Custom Crusher Corners are designed to provide the same benefits as the ones that were custom designed for our "Daddy Longlegs" stretched LJ. They provide for a 4" wheelbase stretch with up to a 40" tire. The longer wheelbase is key for maximizing off-road performance and climbing ability. Moving the rear axle back also improves the departure angle at the rear of the Jeep. These Crusher Corners also provide for "wheel well to wheel well" coverage (when used with "Daddy Longlegs" Rocker Knockers), providing full wrap-under protection right to the rear wheel opening. In addition to the wheelbase stretch and huge wheel opening, the wheel opening has also been moved up as high as possible, providing for extreme clearance and allowing for extreme articulation while maintaining a Low Center Of Gravity (LCOG). Note that all of the "Daddy Longlegs" components, including Rocker Knockers Crusher Corners and DeFender Flares, are designed to fit and work together. They may be purchased separately but are not guaranteed to fit with other manufacturer's armor products.

"Daddy Longlegs" Rear Crusher Flares these special edition Crusher Corners come with special "Daddy Longlegs" versions of our 3" Rear DeFender Flares, already welded on. These DeFender Flares are designed to match Poison Spyder's front DeFender XC's to provide the extreme clearance of a "highline" rear flare. They allow for a huge wheel opening to fit up to a 40" tire, and are designed specifically to fit with the Daddy Longlegs version "wheel well to wheel well" Rocker Knockers and Crusher Corners. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength.

Taillight, License Plate and Tailgate Considerations "Daddy Longlegs" Crusher Corners require deletion of the stock taillight boxes, and replacing them with flush-mount, high-intensity. These LED taillights are rugged, bright, and most importantly very low profile so they won't get knocked off the Jeep by a protruding rock. If converting to LED taillights for the first time, an upgraded LED Electronic Flasher may be needed to correct the turn signal strobe timing. "Daddy Longlegs" Crusher Corners do not come with cut-outs for the stock tailgate hinges, and therefore require the use of a drop-down tailgate such as Poison Spyder's TrailGate. These Corners also require relocating the license plate from its OE location on the lower driver's side corner. We recommend locating it to the center of the TrailGate, if not running a bumper-mounted spare tire. It may be installed there by simply drilling four holes and bolting it directly to the surface of the TrailGate. If using a bumper-mounted spare tire, the license plate may be relocated to the center of the spare tire. If it is a Poison Spyder RockBrawler Rear Bumper with Tire Carrier, it already comes with a license plate mount to do this. DIY solutions may have to be found for other manufacturer's bumper/tire carriers. Our LED License Plate & Third Brake Light with 6' Extension Harness may be used to illuminate the relocated license plate, if desired. IMPORTANT: This is a custom item that is built to order. Please add 2-3 weeks to normal delivery times for this item.

This product ships as bare steel it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

LJ CRUSHER CORNERS - STANDARD - 3" DEFENDER FLARES (STEEL) - POISON SPYDER
PS 15-04-073
Price: $674.99

Poison Spyder Crusher Corners are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners are a key component in avoiding body damage to your Jeep. Crusher Corners are CNC laser cut from high strength 3/16" plate steel. The precisely cut pattern isthen carefully roll-formed for a perfect fit to your Jeep's body lines. Crusher Corners protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor at the front edge, Crusher Corners are precisely cut to integrate with Poison Spyder Rocker Knockers or Ricochet Rockers. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks.

For the ultimate in corner protection and hard core looks, these Crusher Corners feature our 3" Weld-On DeFender Flares. DeFender Flares are designed to match Poison Spyder's front DeFenders. Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. The 3" DeFender Flares match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.

LJ CRUSHER CORNERS-STANDARD - 3" DEFENDER FLARES (ALUMINUM) - POISON SPYDER
PS 15-04-073-ALUM
Price: $948.99

Poison Spyder Crusher Corners are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners are a key component in avoiding body damage to your Jeep. These Crusher Corners are CNC laser cut from 6061-T6 aluminum. The precisely cut pattern is then carefully formed for a perfect fit to your Jeep's body lines. Crusher Corners protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor at the front edge, Crusher Corners are precisely cut to integrate with Poison Spyder Rocker Knockers or Ricochet Rockers. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks.

For the ultimate in corner protection and hard core looks, these Crusher Corners feature our 3" Weld-On DeFender Flares. DeFender Flares are designed to match Poison Spyder's front DeFenders. Fabricated entirely of 3/16" 6061-T6 aluminum plate, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. The 3" DeFender Flares match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.

Note that aluminum is recommended when weight is valued more than indestructibility. Choose these light-weight aluminum Crusher Corners with DeFender Flares if your Jeep is only used occasionally on the tougher trails, and if on those occasions you are a skilled, patient driver. At 3/16" thick, these aluminum components are fairly tough, but they simply will not withstand the same amount of abuse that our steel ones will.

This product ships as bare aluminum it will need to be painted or powder coated prior to final installation. We do not offer a powder coat option for this item.

LJ CRUSHER CORNERS - STANDARD - 5" DEFENDER FLARES (STEEL) - POISON SPYDER
PS 15-04-075
Price: $698.99

Poison Spyder Crusher Corners are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners are a key component in avoiding body damage to your Jeep. Crusher Corners are CNC laser cut from high strength 3/16" plate steel. The precisely cut pattern isthen carefully roll-formed for a perfect fit to your Jeep's body lines. Crusher Corners protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor at the front edge, Crusher Corners are precisely cut to integrate with Poison Spyder Rocker Knockers or Ricochet Rockers. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks. For the ultimate in corner protection and hard core looks, these Crusher Corners feature our 5" Weld-On DeFender Flares, designed to match Poison Spyder's front TJ DeFenders with 5" Tapered Flare.

Fabricated entirely of 3/16" plate steel, DeFender Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. The 3" DeFender Flares match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.