Displaying 1 - 17 of 17 results
QUICK RELEASE SHACKLE/ D-RING 3/4" 4.75 TON, BLACK - SMITTYBILT PRODUCTS
SB 13049B
Price: $14.99

Smittybilt Heavy Duty black D-Ring w/quick release, comes with a 3/4" pin. 4.75 ton weight rating.

TIRE DEFLATOR - SMITTYBILT PRODUCTS
SB 2723
Price: $39.99

Air down quickly with these Smittybilt tire deflators. They come in a set of 4 and are adjustable in 3 lb increments all the way down to 8 lbs.


WINCH ACCESSORY KIT - SMITTYBILT PRODUCTS
SB 2726
Price: $109.99

This handy winch accessory kit contains everything that you need to get yourself unstuck except the winch. You get a Tree Trunk Protector, a Snatch Block, a Shackle Kit, a Choker Chain with Hooks, a pair of Heavy Duty Work Gloves, and a Soft Side Carry bag.


TRAIL GEAR BAG - SMITTYBILT PRODUCTS
SB 2726-01
Price: $15.99

Handy trail gear bag - black


SNATCH BLOCK 36000# RATED - SMITTYBILT PRODUCTS
SB 2748
Price: $102.99

Smittybilt snatch blocks can double your winch pull rating.

This Smittybilt snatch block 36K is rated for 36,000lbs. capacity for self recovery winches.

Look to Smittybilt for snatch blocks to help guide you out of any situation.

HIGH PERFORMANCE AIR COMPRESSOR - SMITTYBILT PRODUCTS
SB 2780
Price: $92.99

The most powerful in its class. Powered by a 1/3 horsepower 12-volt, oilless direct drive motor with 30 amp in-line fuse for added protection.

  • Inflates a full size truck tire in under 4 minutes
  • Inflates a passenger car tire in under 1 minute
  • Powerful 12-volt motor
  • Powers directly from a car battery
  • Quick release 16 ft. coil hose
  • E-Z twist brass inflator
  • 8 ft. power cord
  • Convenient nylon carry bag


SNATCH STRAP-17,000 LB. - SMITTYBILT PRODUCTS
SB CC120
2" X 20` RECOVERY STRAP - SMITTYBILT PRODUCTS
SB CC220
Price: $30.99

This 2" recovery strap is 20' long and rated at 20000 lbs. Lighter and easier to use than a chain.


2" X 30` RECOVERY STRAP - SMITTYBILT PRODUCTS
SB CC230
Price: $36.99

This 2" recovery strap is 30' long and rated at 20000 lbs. Lighter and easier to use than a chain.


3" X 30` RECOVERY STRAP - SMITTYBILT PRODUCTS
SB CC330
Price: $41.99

This 3" recovery strap is 30' long and rated at 30000 lbs. Lighter and easier to use than a chain.


4" X 20` RECOVERY STRAP - SMITTYBILT PRODUCTS
SB CC420
Price: $41.99

This 4" recovery strap is 20' long and rated at 40000 lbs. Lighter and easier to use than a chain.


3/4" RECOVERY SHACKLE UNIVERSAL - POISON SPYDER
PS 56-16-010
Price: $15.99

These heavy duty 3/4" Recovery Shackles are rated at a working load limit of 4-3/4 tons.

Made of high quality steel and yellow zinc plated for corrosion resistance. The heavy duty D-ring and massive 7/8" threaded pin make a quick job of safely rigging recovery straps and winch cables.

No 4X4 should be on the trail without a couple of these in the onboard recovery kit.

Sold by the piece.

3X30 RECOVERY STRAP - POISON SPYDER
PS 57-63-515
Price: $69.99

The Poison Spyder 3in X 30ft Recovery Strap is a must-have for every 4X4's onboard recovery kit. The strap is 30 feet long* and made of 3in* military grade nylon fabric that is designed to stretch 20% when in use, which assists with multiplying momentum when towing stuck vehicles out of a sticky situation.

Other, more rigid materials tend to jerk when the strap goes tight on a full-throttle pull, potentially damaging both vehicles as well as bystanders. This Recovery Strap is rated at 24,250 lbs. capacity, and the loop ends are protected with a nylon sheath. The strap is dyed black to easily identify it as Poison Spyder quality, sewn with red thread, red loop end protectors and red protective sleeves, labeled with the Poison Spyder logo.

Keep one of these and a couple of our 3/4" RECOVERY SHACKLES in your tool kit, and you can get yourself or your buddies out of just about any sticky situation.

ALUMINUM HAWSE WINCH FAIRLEAD - POISON SPYDER
PS 45-45-010
Price: $55.99

The Poison Spyder Aluminum Hawse Fairlead will help protect your synthetic winchline during winch operation, as well as give the front of your 4X4 a little bit of Poison Spyder attitude. CNC machined from billet aluminum and powdercoated for a durable finish.

WINCH FAIRLEAD MOUNT - POISON SPYDER
PS 45-57-010
Price: $55.99

The Poison Spyder Winch Fairlead Mount installs between the winch and the bumper to provide a mounting surface for the winch fairlead. The Winch Fairlead Mount is designed to fit the 10 x 4-1/2 bolt pattern common to most Warn winches except 8274. Many other winch brands use the same bolt pattern. The Winch Fairlead Mount is designed to fit the winch rope slot and 10 bolt pattern of most Warn or common aftermarket roller or Hawse fairleads, including the Poison Spyder Aluminum Hawse Winch Fairlead (P/N 45-45-010).

ZEON WINCH SPACER PLATES - POISON SPYDER
PS 45-57-010-03
Price: $10.99

Use these Spacer Plates when mounting a Warn Zeon Winch on to your Poison Spyder Brawler Lite, Brawler MID**, or JK RockBrawler front bumper. On these bumpers, the slight recess along the top surface of the bumper is just slightly incompatible with the extra wide, low housing ends on the Zeon winches. Simply lifting the winch about an extra 1/8" solves this problem. These spacers are a convenient way to do that, by simply placing them between the winch and the fairlead mount to provide the lift needed. CNC laser cut from 3/16" plate steel, powder coated black.

**IMPORTANT: Brawler MID Front Bumpers will require TWO pairs of spacer plates to install the Warn Zeon winch.

JEEP JK TRUNK GEAR BAG - POISON SPYDER
PS 57-17-100
Price: $39.99

The Poison Spyder Gear Bag is perfect for storing those essential items every 4X4 should carry on board. Made of heavy duty materials, this Gear Bag is a great place to put tool rolls, recovery gear, emergency and survival supplies. The bag features an extra wide, pleated opening for stowing large items, a heavy duty zipper with dual zipper pulls, and heavy duty nylon strap handles that circle the bag for extra support when hand carrying the bag. Black with a rubberized Poison Spyder logo stitched to the flap. The 22" X 8.5" X 5" Gear Bag was designed specifically to fit into the "trunk" area beneath the floor at the back of the Jeep JK, but it will work great in any 4X4.