01-10 GM 2500, 3500 UNIBALL UPPER CONTROL ARMS - FABTECH MOTORSPORTS

These Fabtech Uniball Upper Control Arms fit 01-10 GM 2500s and 3500s with 0 and 6 inches of lift.

These arms provide an additional +2 degrees of caster.

  • Fabtechs Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.

These Fabtech Uniball Upper Control Arms fit 01-10 GM 2500s and 3500s with 0 and 6 inches of lift.

These arms provide an additional +2 degrees of caster.

  • Fabtech's Uniball Upper Control Arms are designed for use with stock or lifted vehicles. These heavy duty control arms replace the stock upper control arms and are designed for severe use.
  • These Fabtech control arms are built from thick .120 wall 4130 Chromoly tubing and heavily gusseted at all critical points.
  • A large 1 inch I.D. stainless steel Teflon lined American made Uniball bearing is indexed to the arm and allows for increased wheel travel when used with Dirt Logic Coilover shocks.
  • A heat treated 4340 Uniball pin is super strong and can be installed with no modifications to the spindle.